Home Security System User Manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Safety Precautions
- Contents
- Introduction
- Preparations
- Connection Examples
- Preparation Procedure
- Step 1 Connection and Installation
- Step 2 Setting the Network
- Step 3 Adjusting the Camera
- Operations
- Others
21
2-2 Setting the PC’s IP Address for Windows XP (continued)
3.
Select [Internet Protocol (TCP/IP)] and click [Properties].
4.
Select [Use the following IP address] to set [IP Address] and [Subnet Mask] and then click
.
Select [Internet Protocol (TCP/IP)].
5.
Click in [Local Area Connection Properties].
Click [Properties].
Click
.
Select [Use the following IP address].
Set [IP Address] to “192.168.0.3.”
Note
● Before changing the IP address,
note down the original address.
● Do not use the same IP address
elsewhere in this network environ-
ment.
Set [Subnet Mask] to an appropriate value
according to the operating environment.
Ask the network administrator if necessary.
VN-C10_E_01-43.pm65e 14/04/03, 10:13 AM21