Operation Manual

16
4 Start playback.
The tracks you have selected are played back in the order
you have programmed.
• Tracks cannot be selected with the Numeric buttons during
Program Play.
To check the programmed contents
While the PROG. indicator is shown on the display and
before playback...
To modify the program
While the PROG. indicator is shown on the display and
before playback...
Playing at Random—Random Play
You can play back all the tracks on the disc at random.
1 Press RANDOM.
2 Start play back.
Playback starts in random order.
Random Play ends when all tracks are played.
• Tracks cannot be selected with the Numeric buttons during
Random Play.
To exit from Random Play
While the RANDOM indicator is shown on the display...
To skip a track: To pause: To stop:
To release, press
again.
Edit:
1 Press DISPLAY/PROGRAM repeatedly until
displaying the programmed number you want to edit.
2 Repeat the step 2 on page 15.
To add step in the program:
1 Press DISPLAY/PROGRAM repeatedly until
displaying “--” on the display.
2 Repeat the step 2 on page 15.
To erase entire program:
Exit from Program mode at the same time.
All the programs are also erased under the following action:
open CD door, change other sources, turn off the unit.
CD
CD
STOP
DISPLAY/
PROGRAM
STOP
To skip a track: To pause: To stop:
To release, press
again.
Remote
ONLY
RANDOM
CD
CD
STOP
RANDOM
UX-S15[B].BOOK Page 16 Monday, May 21, 2007 10:30 AM