Operation Manual

9
Listening to the Radio
To select the band (FM or AM)
You can also carry out the same operation using the FM/AM
on the System.
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen
Select “FM MONO”
To preset the stations
You can preset 20 FM and 10 AM stations.
1 Tune in to a station you want to preset.
2 Activate the preset number entry mode.
• Finish the following process while the indication on the
display is flashing.
3 Select a preset number for the station you store.
• How to Select Numbers, see page 8.
• You can also use the 4/¢ .
4 Store the station.
To tune in to a preset station
1 Select a band (FM or AM).
2 Select a number of the preset station you stored.
How to Select Numbers, see page 8.
You can also use the 4/¢ .
Remote control: Main unit:
FM
MONO:
Reception will improve though stereo
effect is lost. MONO indicator lights up.
FM/AM
FM FM MONO
AM
TUNING/GROUP/PTY
1 sec.
1 sec.
FM/AM
FM FM MONO
AM
PROG.
MHz
kHz
FM/AM
FM FM MONO
AM
Playable media and files
This system can playback following types of media and
files.
• This system may not playback some files even though
their formats are listed above.
• Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
Media Audio CD, CD-R/RW
File format MP3, WMA
Audio CD CD-R CD-RW
UX-S15[B].BOOK Page 9 Monday, May 21, 2007 10:30 AM