Operation Manual

8
Daily Operations—Playback
1 Turn on the power.
The STANDBY lamp on the main unit turns off.
2 Select the source.
Playback automatically starts if the selected source is
ready to start.
• If you press TAPE, only the source will be selected.
3 Adjust the volume.
4 Operate the target source as explained
later.
To turn off (standby) the System
How to Select Numbers
2
1
3
4
VOLUME
2
1
3
TRACK CD
FM/AMCD TAPE
DISPLAY/
PROGRAM
Numeric
buttons
TUNING/
GROUP/PTY
4/1/
Á/¢
PRESET
STOP 7
The STANDBY lamp on the main unit
lights up.
• A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
Examples:
To select number 5, press 5.
To select number 15, press 10
→ 1 → 5.
To select number 30, press 10
→ 3 → 0.
To select number 125, press
10 twice → 1 → 2 → 5.
=
>
=
>
=
>
UX-S15[B].BOOK Page 8 Monday, May 21, 2007 10:30 AM