TM-H1750CG OPERATING INSTRUCTIONS [ TM-H1750CG/E / TM-H1750CG/U ] COLOR VIDEO MONITOR INSTRUCTIONS FRANÇAIS TM-H1750CG DEUTSCH ENGLISH BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR MANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI INSTRUCCIONES : MONITOR DE VIDEO A COLOR !"#$%&'(&) ITALIANO For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.
WARNINGS To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. Never try to service it yourself. WARNING : THIS APPARATUS MUST BE EARTHED. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB(A) according to ISO 7779.
CONTROLS AND FEATURES FRONT VIEW REAR VIEW VIDEO A 1 16 CHROMA CONTRAST VOLUME/SELECT MENU UNDER SCAN COLOR OFF BLUE CHECK ASPECT A B C SLOT D REMOTE POWER IN 15 PHASE BRIGHT SLOT 18 OUT VIDEO B INPUT SELECT 17 19 IN OUT VIDEO A IN OUT VIDEO B CHROMA CONTRAST TM-H1750CG PHASE VOLUME/SELECT MENU UNDER SCAN COLOR OFF BLUE CHECK ASPECT BRIGHT A B C SLOT D POWER 2 3 4 5 6 7 8 9 10 11 12 13 14 IN IN INPUT SELECT 20 IN Y/C OU
(cont’d) TM-H1750CG 1-4 CONTROLS AND FEATURES CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) REAR VIEW COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG) 25 Input (IN) and output (OUT) terminals for component (color deference) or RGB signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.
PREPARATION HOW TO HANDLE BASIC OPERATIONS INSTALLING THE INPUT CARD BASIC OPERATION 1. Turn off the Color Video Monitor’s main power and unplug the power cable from the AC outlet. 2. Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card. 1. Press the main power switch to turn on the power. 2. Press the POWER switch to turn on the power. Rear side of the TM-H1750CG color video monitor SLOT 3.
TM-H1750CG 1-6 HOW TO HANDLE BASIC OPERATIONS (cont’d) HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE
HOW TO USE THE MENU FUNCTIONS (cont’d) • WHITE BALANCE • CONTROL LOCK • STATUS DISPLAY • REMOTE SYSTEM • INPUT REMOTE 1 Notes: ● Parameters for H. POSITION and V. POSITION can be set separately depending on the signal (Input A (VIDEO), Input B (VIDEO), Input C or Input D) selected with the 2 input select buttons on the front panel. Select the required video input with the input select buttons on the front panel in advance.
TM-H1750CG 1-8 HOW TO INITIALIZE THE SETTING BASIC CONNECTION EXAMPLE Notes: SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.
HOW TO USE EXTERNAL CONTROL BASIC CONNECTION EXAMPLE (cont’d) ABOUT EXTERNAL CONTROL VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) This monitor is provided with an external control terminal. MAKE (make contact) or TRG. (trigger) system can be selected. (MAKE (make contact system): The function is controlled with H and L (short-circuit/open with the 15th pin GND). (TRG.
Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) Is the power plug loosened or disconnected? Firmly insert the power plug. Is the main power turned OFF? Turn the main power ON. (See page 6.
TM-H1750CG SPECIFICATIONS Effective screen size Scanning frequency Horizontal resolution Input terminals VIDEO A VIDEO B AUDIO A AUDIO B REMOTE : Color video monitor : PAL, NTSC (3.58) : 16-3/16" (41 cm) measured diagonally, 90° deflection, in-line gun, trio-dot type (phosphor dot-trio pitch 0.27 mm) : Width 12-7/8" (327.5 mm) Height 9-5/8" (246.2 mm) Diagonal 16-1/32" (407.1 mm) : (H) 15.734 kHz (NTSC) 15.625 kHz (PAL) (V) 59.
TM-H1750CG Dimensions Unit : inch (mm) < Side View > < Front View > 16-1/2 (418.1) 16-1/8 (407) 15-5/8 (395) 1/16 (1.5) VOLUME/SELECT MENU UNDER SCAN COLOR OFF BLUE CHECK ASPECT A BRIGHT B C SLOT D POWER INPUT SELECT 11-3/8 (288) 2-3/4 (68) 11-3/8 (286) 1/8 (3) PHASE 1/8 (3) CHROMA CONTRAST TM-H1750CG 7 (175) 9-5/8 (246.2)* 13-1/4 (334) 12-7/8 (327.5)* ø7/8 (20) * Asterisks (*) are used to indicate front panel dimensions.
