Manual

Getting started This page is for TH-M65

• Assemblingthesatellite speakers(TH-M65 only)

Each speaker (except the center speaker) has been divided into two

parts for shipment. Before connecting the satellite speakers, first

assemble them by following the procedure below.

Fix the stand to the speaker section.

• Be sure to tighten the screws firmly.

Speakersection

Stand

Screws (4)

(supplied,

M4 x 25 mm)

Speaker section Stand

Before assembling

• Prepare a Phillips screwdriver.

• Take care not to drop the stand while assembling; otherwise, it

may cause damage to the floor or injury.

• Ensure enough space exists for assembly and installation.

• Spread a large, thick cloth on the floor where you assemble the

speakers, so you can protect the floor and the speaker itself.

1 Connect the speaker connectors to the

stand connectors.

• Be sure to connect the speaker connectors by matching their

sizes.

Repeat the procedure from step 1to assemble the other satellite

speakers.

NOTE

• Use the speaker after assembly is fully and correctly done.

• It is recommended to place a cushion under the speaker section.

You can tighten the screws easily by placing the speaker section

horizontally.

Cushion

(not supplied)

Speaker section Rear

Stand

2 Join the stand to the speaker section.

Stand

Speaker section