Instruction Manual
EN
EN - 9
STANDBY/ON
When you rst connect the Soundbar to the mains socket, the Soundbar will be in Standby
mode.
• Press the
button on the Soundbar or on the remote control to switch the Soundbar ON.
• Press the button again to switch the Soundbar back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the Soundbar OFF
completely.
Automatic Power Off Function
The Soundbar automatically turns to Standby mode after about 15 minutes if the TV or the
external unit is disconnected, switched o or the volume is too close to mute.
• To switch the Soundbar off completely, remove the mains plug from the mains socket.
• Please turn the Soundbar off completely to save energy when not in use.
SELECT MODES
Press the
(SOURCE) button on the Soundbar or the AUX, USB, OPTICAL, COAXIAL,
HDMI ARC, (Bluetooth) buttons on the remote control to select the desired mode.
Green > AUX mode
Green ash > USB mode
Blue > BLUETOOTH mode
White > HDMI ARC mode
Orange > OPTICAL mode
Orange ash > COAXIAL mode
ADJUST THE VOLUME
Press the +/- (VOLUME) buttons on the Soundbar or on the remote control to adjust the
volume. If you wish to turn the sound o, press the
(MUTE) button on the remote control.
Press the (MUTE) button again or press the +/- (VOLUME) buttons on the Soundbar or on
the remote control to resume normal listening.
Note: While adjusting the volume, the status LED indicator will quickly flash. When the volume has hit
maximum/minimum value level, the status LED indicator will slowly flash 3 times.
ADJUST THE BASS/TREBLE LEVEL
Press the BASS +/- buttons on the remote control to adjust bass level.
Press the TREBLE +/- buttons on the remote control to adjust treble level.
Note: While adjusting the BASS/TREBLE, the status LED indicator will quickly flash. When the BASS/
TREBLE has hit maximum/minimum value level, the status LED indicator will slowly flash 3 times.
SELECT EQUALIZER (EQ) EFFECT
Press the MOVIE / MUSIC / NEWS buttons on the remote control to select your desired preset
equalizer eects.
RESTORE THE DEFAULT SOUND EFFECT
During playback, press the DEFAULT button on the remote control to restore the default
sound eect (BASS > 0; EQ > Movie; TREBLE > 0).