Manual

To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or - also restores the sound.
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
"Setting Menu" on pages 53.
You can enjoy three kinds of surround_Digital Multichannel
Surround (Dolby Digital and DTS Digital Surround), Dolby Pro
Logic II and DSP modes.
Digital Multichannel Surround--Dolby Digital
and DTS Digital Surround
Dolby Digital or DTS Digital Surround takes effect only when you
enjoy a disc encoded with its signals.
ToactiuateDolbyDigitalor DTSDigitalSurround
When a disc encoded with the Dolby Digital or DTS Digital
Surround is loaded, the system detects it and starts playing the disc
automatically with Multichannel Surround activated.
- For in-depth information about surround modes, see "Creating
Realistic Sound Fields" on pages 21 to 22.
Dolby Pro Logic II--Pro Logic II Music and Pro
Logic II Movie
ToactivateProLogicII modes
Press SURROUND.
The current Pro Logic II mode appears on the display
for a while.
• Each time you press the button, Pro Logic II mode
changes as follows:
" PLIIMUSIC = PLIIMOVIE--
PL IIOFF
• When Dolby Pro Logic II mode is activated, the rlrl PRO LOGIC
II indicator lights up on the display.
- For in-depth information about Dolby Pro Logic II modes, see
"Creating Realistic Sound Fields" on pages 21 to 22.
DSP modes_CONCERT, STADIUM, HALL,
THEATER, LIVE HOUSE
Press • twice.
Playback stops completely.
• This system can memorize the end point even when you
press • once. When you start playback again by
pressing _, playback begins from where it has been stopped--
Resume play.
To remove the loaded disc
Press _.
"OPEN" appears on the display and the disc tray comes
out.
To close the disc tray, press _ again.
To prohibit disc ejection
On the front panel ONLY:
Press and hold ,/ll and I<< for more than _
3 seconds.
"LOCKED" appears on the display, and the
disc tray is locked.
To cancel the prohibition, press and hold
I_/11 and I<_ for more than 3 seconds.
"UNLOCK" appears on the display, and the
disc tray is unlocked.
To turn off the power (into standby)
Press AUDIO O/I (or O/I STANDBY/ON on the front
panel).
The illumination lamp goes off and the STANDBY lamp
lights up.
• If you press AUDIO _)/I (or Oil STANDBY/ON on the front
panel) while the disc tray is kept open, the disc tray closes
automatically, then the system is turned off.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
ToactivateDSPmodes
Press DSP. D,_
The current DSP mode appears on the display for a (_'_
while.
• Each time you press the button, DSP mode changes as
follows:
- For in-depth information about DSP modes, see "Creating
Realistic Sound Fields" on pages 21 to 22.
13