Manual

You can select the scanning mode if your TV equipped with
component video jacks supports the progressive video input.
From the remote control ONLY:
I Press DVD.
You can adjust parameters that affect the appearance of picture.
From the remote control ONLY:
I Press CHOICE while playing back a
disc.
Video Enhance menu appears on TV-screen.
2 Press PROGRESSIVE.
• Each time you press the button, the scanning
mode alternates between "INTERLACE" and
"P-SCAN."
INTERLACE:
Select this if your TV does not support the progressive video input
(conventional TV).
P (Progressive)--SCAN:
Select this if your TV equipped with component video jacks
supports the progressive video input.
When you select the "P-SCAN", P-SCAN indicator lights up on the
display.
Notes:
• If you press PROGRESSIVE while playing back a disc, playing back
stops.
• Some progressive TVs and High-Definition TVs are not fully
compatible with this system, resulting in the unnatural picture when
playing back a DVD in the progressive scanning mode.
In such a case, change the scanning mode to "INTERLACE."
To check the compatibility of your TV,contact your local JVC
customer service center.
• All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
Press cursor A/V repeatedly to
select a parameter you want to .....
adjust. .....
• Adjust gradually to show preferable
appearance by confirming the picture.
Brightness: Controls the brightness of the screen.
Edges: Controls the sharpness of the screen.
Color: Controls the color of the screen.
Contrast: Controls the contrast of the screen.
3 Press cursor _/< repeatedly to
change the setting.
4 Press CHOICE.
Video Enhance menu disappears.
Note:
If you turn off the unit, the video enhance setting return to initial
setting.
11