Operation Manual

11
Connecting the front speakers
Assembling the speakers
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop any component part while
assembling; otherwise, it may cause damage to the
floor or injury.
Installation and Setup
Front speaker
(SP-TH60F)(2)
Stand (2) Base plate (2)
Assembled speakers
With stand: Refer to
steps 1 to 3.
Without stand: Refer to
steps 2 and 3.
Speaker
Stand
Screw M5 x 40 mm/M5 x 1-
5/8 inches (supplied)
Speaker
Stand (or speaker
directly)*
A: Use these screws (M4 x
45 mm/M4 x 1-13/16
inches) when assembling
the speaker with the base
plate.
Base plate
Screw M4 x 20
mm/M4 x 13/16
inches
(supplied)*
* When assembling the speaker with the base plate,
use the screws A.
Red
Black
White
Black
You can route the speaker
cord by using speaker cord
clamp (supplied).
or
When assembling a speaker without stand: