Operation Manual

12
Preparation
NOTE
• No audio signal is output via the [AV] (SCART)
terminal.
DD-8 and DD-3 can output uncompressed digital
video signals to a TV compatible with HDMI (High
Definition Multimedia Interface).
Select “HDMI” for the monitor out type. (Refer to
page 14.)
NOTE
• DD-8 and DD-3 support up to HDMI version 1.0.
The HDMI video signal type can be checked with
the “HDMI” indicator in the display window.
(Refer to “Selecting the video signal type” on
page 13. )
• If the picture is distorted while an HDMI TV is
connected, turn off the main unit and turn it on
again.
• A TV compatible with HDCP (High-Bandwidth
Digital Content Protection) can also be con-
nected to the [HDMI] terminal, so that the
uncompressed HD video signal type can be out-
put as well.
Connecting a TV
Connecting a TV with the [AV]
terminal
TV
To a SCART terminal
SCART cable (not supplied)
Main unit
(rear view)
Connecting a TV with the
[COMPONENT VIDEO OUT] terminals
TV
Main unit
(rear view)
To component
terminals
Component video cable (not supplied)
Connecting a TV with the [HDMI]
terminal (not available for DD-1)
Main unit
(rear view)
TV
HDMI cable (not supplied)
To an HDMI terminal
DD-831[B]-03.fm Page 12 Thursday, October 5, 2006 5:56 PM