Operation Manual

8 English
English
Turning ON the wireless function
When the system and the wireless function are
turned ON, you can enjoy audio from AirPlay/
DLNA and BLUETOOTH sources.
• The wireless function is turned OFF when
shipped.
1
Turn on the power.
Remote control System
2
Press [NETWORK SETUP] on the System
for 3 seconds or longer.
System
(press and hold)
• The NETWORK indicator flashes in red for
30 seconds or longer until the wireless
function turns ON.
• The NETWORK indicator stays lit in white or
flashes in white while the wireless function is
ON.
• To turn the wireless function OFF, press
[NETWORK SETUP] on the System for 3
seconds or longer.
• If the wireless function is ON, BLUETOOTH
can be used regardless of the network
connection status.
Getting started
1
Turn on the power.
Remote control System
• When the power is turned on, the last used
audio source is selected.
2
Select a source.
/ / /
• BLUETOOTH cannot be selected when
the wireless function is OFF.
• Press [INPUT] to change the source.
System
When the wireless function is ON
BLUETOOTH
\
USB
AUDIO IN
|
DIGITAL IN
When the wireless function is OFF
USB
\
DIGITAL IN
AUDIO IN
• When the audio source is changed, the front
indicator lamp lights for 3 seconds in one of
the colors listed below.
AirPlay White
DLNA Green
BLUETOOTH Blue
USB Pink
DIGITAL IN Yellow
AUDIO IN Red
• When playback of an AirPlay/DLNA
device is started, the source automatically
changes.
• The source does not automatically
change when a BLUETOOTH device is
connected. Use the remote control or the
System to change the source.
Basic operations
Unlit
Lights in
white (when
connected to
a network)
or
Flashes in
white (when
not connected
to a network)
When the wireless function is ONWhen the
wireless
function is
OFF
SP-AP1[E]_04.indd 8SP-AP1[E]_04.indd 8 2013/10/16 14:192013/10/16 14:19