VN-T216VPRU FIXED HD IP DOME CAMERA QUICK GUIDE
Contents 1 Introduction .......................................................................................................................... 2 Unpack Everything ................................................................................................................. 2 Preparation ............................................................................................................................ 2 Camera Installation......................................................................
1 Introduction Thank you for purchasing the camera. Before installing it, read the guide carefully and check the model. For more information, please refer to the INSTRUCTIONS on CD-ROM.
Disassembling the Camera • Gently remove the screw to take off camera housing (4). • Set the camera housing (5) and liner aside. Connecting the Wiring Connect the power supply cable to the power connectors. Select one of the following options. Ÿ Inset power cable for AC24V Connect 24 V (~) cables to terminals ~AC24V. Ÿ PoE Connect the network cable to the RJ45 terminal using a switch.
Washer (for Wire) Screw (for Wire) Safety Wire (Fall Prevention Wire, not supplied) Ÿ Connect the wiring then place the camera to a proper position by pushing the button.
Adjusting the Camera Position The dome camera has three axes for positioning the camera. While monitoring the picture on the monitor, adjus t the camera position as follows: • Pan Adjustment (A) For Wall Mount and Tilted Ceilings Rotate the lens base (maximum360° ) until you are satisfied with the field of view. • Horizontal Rotation (B) Rotate 3D assembly in the base. Do not turn assembly more than 360° as this assembly may cause the internal cables to twist and disconnect or break.
Mounting the Camera Ÿ Place the guide pattern sticker (supplied) on the mounting surface and mark three holes according to the guide pattern sticker. Then fasten the sticker to the mounting surface with screws. Ÿ Connect the Safety Wire (Fall Prevention Wire, not supplied) to the camera and the ceiling. Ÿ Secure the camera bottom case (1) to the wall/ceiling with tapping screws, supplied. Ÿ Adjust the view angle (zoom, focus, and Horizontal Rotation).
l 4S Electrical junction box(Optional) 1. Secure the mounting kit (optional) to 4S Electrical box using 2 appropriate screws. 2. Then secure the camera case to mounting kit using 2 appropriate screws. 3. Tuck the cables in the 4S Electrical box. 4. Adjust the view angle (zoom, focus, and Horizontal Rotation). 5. Attach the camera housing. 6. Turn the power on after you have installed the camera. This mounting kit is optional accessory.
Locking the Camera • Use soft, lint -free cloth to wipe the dome cover clean and remove fingerprints. • Attach the inner liner and camera housing. • Turn the power on after you have installed the camera. Network Configuration: Setting Network Camera Environment Setting IP This is a network-based camera and must be assigned an IP address first. The camera’s default IP address is 192.168.0.2 and sub mask is 255.255.255.0. To change IP address, open Network Settings page described later.
• In Internet Explorer, click Internet Options on the Tools menu. • On the Privacy tab, move the settings slider to Low or Accept All Cookies . • Click OK. b. When a proxy server is used, click Internet Options on the Tools menu of Internet Explorer, select Connect tab, click LAN button, and set proxy server. c. Change Security in Internet options as shown below: • On tool menu, click Internet Option. • Press the Security tab. • If the camera operates inside the Intranet, click the Intranet icon.
【Automatic prompting for ActiveX controls】è Enable 【Run ActiveX controls and plug-ins 】è Enable 【Script ActiveX controls marked safe for scripting*】è Enable • Press OK to save the settings. Close all Internet Explorer windows and start a new window. This will allow the new settings to take effect. 6. Type your setting IP address into the brows er. 7. Then you should be able to see the camera image screen.
Using “IP Finder” to Search Camera’s IP Address The IP Finder is a tool which helps users to find VN-T16/216 series network cameras in the LAN which your computer is connected. Please note that IP Finder is only compatible with Windows 7, windows Vista and Windows XP. 1. Insert the CD-ROM in the CD-ROM drive. 2. Copy the IP Finder’s folder to your computer. 3. Double click the IpFinder.exe in your computer’s IP Finder folder. An IP Camera Finder window will pop out.
2 Notice of Use • This manual is designed for administrators and users of the network camera. Please read it carefully before use. All requirements should be followed before using this camera. • Keep this document for future reference. • Please make sure the power source is AC24V / PoE. Only connect the camera to this power system. • The camera must be installed on a solid mounting surface. • Keep the camera and other accessories dry.
3 Warnings Installation and maintenance should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. DANGER! AC24V models require the use of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standards. Power over Ethernet (PoE) should meet the IEEE 802.3af PoE standard.
5 Specifications Operational Specifications Image device 1/2.7-type Mega-pixel CMOS sensor Sensitivity Color:0.6 lx, B/W: 0 lx (50% ) Day/Night True D/N IR-LED Yes (IR Distance 15m) Auto Gain Control Off/On, selectable White Balance ATW (2800K∼8500K) and Manual PAL:1/25~1/10000 sec Electric Shutter NTSC: 1/30~1/10000 sec Noise Reduction Yes 3 Axis Gimbals Yes Motion detection Yes Lens Type 1/3-type 3-9mm F:1.
NTSC: 1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 480), 4CIF(704 x 480), VGA(640 x 480), CIF(352 x 240), QVGA(320 x 240) Resolution PAL: 1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 576), 4CIF(704 x 576), VGA(640 x 480), CIF(352 x 288), QVGA(320 x 240) PAL: Up to 25fps Image Frame Rate NTSC: Up to 30fps Security Multiple user access levels with password protection Users 1 Administrator, 5 Users Video Access from Full control of all camera settings available to Web Browser administrator Windows
Weight 1360g Power Input: removable terminal block Network: RJ45 connector Connectors Audio In/out: removable terminal block Alarm In/out: removable terminal block Environmental Operating Temperature © -10°C to 50°C Operating Humidity 0% to 90% Storage Temperature -20°C to 60°C 2012 JVC KENWOOD Corporation 16
