User manual
Table Of Contents
- Cover
- Introduction
- Installation and Connection
- System Example
- About Connection Cables
- The right sequence to connect and set the camera
- Setting the switches
- Mounting the base
- Cable Connection
- Mounting the camera unit
- Adjusting the video image
- Mounting the inner dome
- Mounting the dome cover
- Mounting the camera using the electrical box
- Mounting the camera using the pipe
- White-spot correction
- Others
- Back
27
Adjusting the brightness
Usually, adjustment of the brightness is not
required. When this is necessary, adjust the iris
level accordingly.
To darken : Anti-clockwise direction (L
side)
To brighten : Clockwise direction (H side)
Memo:
● Do not perform iris level adjustment within 30
seconds after pressing the focus adjustment
button. (It cannot be adjusted correctly as the
electronic shutter mode is activated.)
● Before adjusting the iris level, set the [AGC]
switch of selection switch C to AOFFB. If
turning too much to L side when not set to
AOFFB, AGC feature will activate causing the
sensitivity increases and the picture quality
may appear grainy.
TK-C215VP4_JP.book Page 27 Thursday, November 2, 2006 10:51 AM