Manual

Operating Other Manufacturers' Video Equipment--
This rems_ control supplied with the r_eeiver can transmit control signals for other manufacturers' TV& CATV
converters, DBS tuners, VCRs and DVD players.
V_en operating the ut_cr manufacturers' cumponents, refer also to
the n_muals supplied with them.
• ARer replacing batteries fur the remote conrail, you need to set
the manufactLtres' codes again,
To change the transmittable signals for
operating another manufacturer's TV
1. _ss and hold TV Oil.
2. lh_ss TV/DBS.
For RX_030VBK: "CALL" appears un the display window of
the remote conrail
3. Enter a manufacturer's code using buttons I - 9,
and 0.
See the list on page 49 ta find the code.
4. Release TV O11.
l'hc fulIowing buttons can be used for operating a TV:
TV O/1: 3_rn on and off a T'v',
TV VOL +/-: Adjast the volume,
TVNIDEO: Set the input m_e (either I'V or VIDEO),
Afte_ Wessing T¥/DBS, you can perfurm the fulIowing
operations un a TV:
CH +/-: Change the channels,
1 - 10/0, O, 100+ (+10):
Select the channels.
The l0/0 button wi11Nnctiun a:sthe EN'EER
button if your I'V r_qaims pressing ENTER
'afterselecting a channel number.
Notes:
• All the functions listed abo_ may not be assigned to the
buttons for some TVs.
• lfyou cannot change the channelsof some TVsbypressing
10keys, press CH +/- for changing thechannels.
5. !IYy to operate your TV by pressing 'IT O&
When yuLtrTV t_ms un c¢ oJ"i',you have entered the cc_rmct
code,
If there are more than one c{ute listed for your br',md ufTV,
t*'3"each uric until the carrcct one is entered.
To change the transmittable signals for
operating a CATV converter or DBS tuner
1. Press and hold CA'I_IDBS Oil.
. Press CATV/DBS CONTROL
For RX-8030VBK: "CALL" appega'sun the display wJnduw u{'
the remuta cuntruI.
3 Enter a manufacturer's code using buttons 1 - 9,
and 0.
See the list onpage 49 to fled the code,
4. Release CA'IT_BS 0/I.
The folk)wingbuttons can be used t'_yruperafing a C_I'V
convertor and DBS t_.mar:
CATViDBS O/1: :l_rn on and off a CNI'V cunvertor c¢ DBS
tllnOL
A:fferpressing C_I'V/DBS CONTROL, you can perfc_rm the
fallowing uporations on a CATV convertor" or DBS t_.mer:
CH +/-: Change the channels,
1 - 1010, O, 100+ (+10):
Select the channels,
The 10/0 button wiII Nnctiun as the EbrIIER
button ff your t_aipment r_uires pressing
ENTER 'afterselecting a channel number.
5. "lYy to operate your CATV converter or DBS
tuner by pressing CATV/DBS O/I.
When yourCATV canv_er or DBS tuner rams un or off. you
have entered the cc_rrectcode,
If there a_ more than one code listed for yaur brand of
CATV canverter or DBS timer, try each une until the c_rmct
une is entered,
Note:
You cannot preset the signals for beth the CATV converter and DBS
tuner at the same time,
47