Manual

AV C0MPU MNK Remote Control System
The AV COMPU LINK remote eon_'ot sy_em allows you to operate JVCb video components (TV_ VCR, and DVD player]
through the receiver.
l'his receiver is eqaipped with the AV COMPU LINK-1II which adds a tbncfion to the Ivrevioas version in c_rdezto operate JVC's video
components through the video components terminaIs. 3b asc this remote control system, connect the video components you want to operate,
t'ollowing the diagrams below and the procedure on the next page.
CONNECTIONS 1 : AV COMPU LINK Connection
VCR DVD player TV
!ra!!
m
IMPORTANT:
]
]
CAUTION:
You can only connect tothe TV
with the AV COMPU LINK EX or
AV COMPU LINK-Ill jack.
DO NOT connect to the TV with
AV COMPU LINK RECEIVEP_/
AMP jack
The AV COMPU LINK remote control system cannot control the DeS tuner.
• For RX.80_)VBK:Connect the VCR to theVCR 1 jacks, Videc components connected to theVIDEO and VCR 2jacks on the receiver
cannot be controlled with the AV COMPU LINK remote control system.
Notes:
• When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot usa automatic
selection of TV'a input mode (see page 43).
• When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
CONNECTIONS 2; Video Cable Connection
'l_s receiver is equipped with t_ree types _fthe vide_ terminals--gwido3, composite video, and component vide3, and the signals coming
into this receiver t_roagh one type of vide_ jacks can output only _roagh the jack of the same type, So you need m connect the VCR and/or
DVD playu_ to the TV asing one ogthe following three ways:
• When using the AV COMPU LINK remote control system, set the component video input for the IIVI) player and the DBS tuner
correctly (see "Set-ringthe Component Video Input" on page 30); otherwise, the cc_rrectinput for this receiver wiII not be selected on the
l"vl
CASE1
CASE2
CASE3
When connecting the source equipment to the receiver through the _video jacks, connect this receiver
to the TV's Video Input 1 jack using S-video cables.
Source RX-g030VBK
RX_7030VBK
equipment SMdeo cord RX-7032VSL
SMdeo cord
TV
To video Input 1
When connecting the source equipment to the receiver through the composite video jacks, connect
this receiver to the TV's Video Input 2 jack (composite video input) using composite video cables.
Source RX-8030VBK
RX-7030VBK TV
equipment Composite RX_7032VSL Composite
video cord video cord To video Input 2
When connecting the source equipment to the receiver through the component video jacks, connect
this receiver to the TV's Video Input 2 jack (component video input) using component video cables.
Source RX-8030VBK
RX-7030VBK TV
equipment Component RXV032VSL Component
video cord video cord To video Input 2
42