Manual

You can also use the remote control f{yradjusting the speakvr
output level.
When using the remote control, you can make an adj t_stme_t
while listening to test tone.
1. Press SOUNIL
l'be 10 keys are activated for sound adjt_stmants.
2. Press TI_qT to cheek if you eaa hear Ihe sounds throagh
all the speake_ at equal level.
Ibst tone eon_s oat of the speakers in the following order.
• No test tone comas oat of the deactivated speakers and the
subwoof_r.
FRNT L (Left front speaker) -_ CENTER (Center speaker) -_
FRNT R (Right front speaker) -._
SURR R (Right surround speaker) -*
S BACK (surround back speaker) -_
SURR L (Left surround speaker) -* (Back to the beginning)
3. Select a speaker you want Io adjttst.
• 3b select the lut_ front speaker, press FRObrI'•L.
• _lb selec_ t2_ecente_ speaker, press CEbrI ER.
• _lb select t2_eright front speaker, press P:ltObrI'•R.
• _lb select t2_eright s_and speaker, press SURR•R.
• _lb select t2_esurround back speaker, Wess SURR BACK.
• 3b select the lei_ sttrmund speaker, wess SURR•L.
4. Press LFNEL + or LI_;VH. - to adjt_st Ihe speaker
output level (-10 dB Io +10 dB).
5. Repeat slops 3 and 4 Io adjt_st Ihe other speaker's output
levels.
6. Press TI_qT again to stop the lesl tone.
l!_djusting the Sound Parameters for the
Surround and OSP Modes
You can _ust the Surround and DSP sound par_aeters _ yo_r
preference.
- When center speaker is sat to "NONE." CTR I'ONE, CNTR
WIDTH, and CNTR GAIN are not available.
• Adiustable t_arameters
You can adjust the t'ollowing paramat_rs:
For Stlrrotmd_ DAP, mrd All Channel Stl_reo modes (when the
eenll_r speaker is eannected)
• This selling is common I_ all su_ouad modes, and is
memorized separatd_ for DSP modes.
CTR TONE: Adjust the center tone, As the number
increases, the di_ogue becomes cleawr so
that the human voices change t_mm soft to
gharp.
(N_rmally select "3 (initiaI sett_ng)?'
Adj_stable range: 1 m 5)
For IIAP modes
• Once you have made an _justment, JtJsmemorized for each
DAP mode.
EFFECT: Adjtlst the DAP effect levek As the number
increases, the DAP effect becomes smmg_r.
(N_rmally select "3 (initiaI setting)?'
Adjt_stable range: 1 m 5)
ROOMSIZE: Adjt_st the vktual rc_m size. As the number
increases, the inte_al between reflections
increases so t3_atyou will feel as if you were
in a larger mum.
(N_rmally select "3 (in[tin1 setting)?'
Adjt_stable range: 1 m 5)
LIV ENESS: Adjt_st the ]iveness effect. As the numbe_
increases, the at_anuation level of reflections
over time decreases so that asoustics change
from "Dead" to "Live?'
(N_rmally select "3 (in[tin1 setting)?'
Adjt_stable range: 1 m 5)
For Pro Logic II Ml_sk only
PANORAMA: Select "ON" to add "wraparound" sound
effect with sidewall image. (l_itial satxing:
,,Oh>_,)
CNTRWIDTH: Adjtlsttbecanterchannel localization
between the center speaker and the lu_right
speakers. As the number inoreases, the center
channel sound moves toward the left and
right speakers. (N_vmaally select "3 (initiN
setting)?' Adjustable range: OFF and 1 m 7)
I)IMENSION: Adjtlst sound ]o_cal_zationposition. As the
number increases, the sound IoeaIiza_on
moves towards forward {_mmbackward.
(N_rmally select "4 (initi_ sett_ng)Y
Adjt_stable range: 1 m 7)
For Nee:6 M_sic only
CNTR GAIN: Adjt_st the sound localization o{'the center
channel. As the numbe_ inoreases, center
channel will be loeNized clea'ly.
(N_rmally select "0.2 (initial setting)?'
Adjt_stable range: 0 m 0.5)
33