Manual

Setting the Speaker Distance
'l_e _anee from your listening peint _ the speak_ is another
impe_ant element to obtain the best pessthle soundof the Surround
and DSP modes, Set the distance from your listeningpoint to the
By reft_rring to the speak_r distance _t_ng, this unit automatically
sets the delay time of the sound through each speaker so that sounds
tl_rough all the speakers can manh you at the same time,
• Kyou have used Quick Speaker Setup on page 25, this setting is
notreqaired,
• Measurim_ unit_DIST UNIT
Seleet which measuring unit you lJ,se.
You can adjust subw_)fer and bass sounds precisely according to
your preference.
• Subwoofer eutout--S WFR OUTPUT
You can select the type of the signaI which can be transmitted
through the subwoofirr. In other wo_, you can dettrrmine
whether or not the bass elements of the _zont speak_rr channels
are t'cansmitled drrough the subwoofcr regardless of the front
speaktrr size setting (either "SMALU' c*r"LARGE").
Seled one or the fullowing:
feet: Selant to set the distance in feet.
• Speaker distance_FRONT DISTANCE, CNTR
DISTANCE. SURR DISTANCE. SBACK DISTANCE
Set the dislanee fcom the listening p_mt within the r,mge of
0.3 m (1 fU lu 9.0 m (30 It), in 0.3 m (1 ft) intervals.
• V_qaenshipped _mm the fantcrry, distance for each speaktrr is
set m "3.0 m (10 ft)Y
Notes:
• Youcannotsetthespeakerdistanseforthespeakersyouhave
selected "NONE" (see page 27).
• TNssetllngisnctvalldfortheDVDMULTlpiaybackmode.
I
/
/
/
Ex, tn the above ease, set the speaker distance as follows;
Front speakers: 3.0 m (10 ft)
Center speakers: 3.0 m (10 ft)
Surround speakers: 2.7 m (9 ft)
Surround back speakers: 2.4 m (8 ft}
LFE+MAIN: Selant to always add the bass elements of the
_mnt speaker channels (MAIN) to the above
(LFE) _tting, and to transmi* them t_rough the
subw_ofer.
Note:
If you have selected _NO" for the subwoofer, this function is_ct
available.
Crossover freouenc_ROSS OVER
When you use a subwoothr, you can select the cutoff" i?aguency
fcrr the small speakers used.
Seled one or the cn_ssover frequency levers according Io Ihe
size of the _ll speaker connected.
80Hz: Selec_ when the cone speaker uni_ bail_ in the speaker is
about 12 cm (4 _/, inches).
120Hz: Selec_ when the cone speaker uniI built in the speak_rr is
about 8 cm (3 V_ainches).
1$0Hz: Selec_ when the cone speaker uni_ bail_ in the speaker is
about 6 cm (2 % inches),
Notes:
.* If you have selected %ARGE" Ior all activated speakers (see
page 27), this function is fixed to "OFF."
• CrseseverfrequencyisnctvalldfortheDVDMULTIplayback,
All Channel Stereo, HEADPHONE, and 3D HEADPHONE
mode.
28