INSTRUCTIONS

Main Features
The features for the combination of this unit and the HD PTZ
REMOTE CAMERA (KY-PZ100) are as follows.
Simple Operation with LCD Touch Panel
Equipped with full color LCD touch panel, which makes
operation easy through its versatile screen configuration.
Operate Camera Freely with Control Lever
and Customized Buttons
Equipped with a control lever and customized buttons
assignable with
functions, which enhances the operability of the
camera.
Also enables smooth pan/tilt operation.
Control up to 100 units of HD PTZ REMOTE
CAMERA
Up to 100 units of HD PTZ REMOTE CAMERA (KY-PZ100) can
be controlled.
Precautions
Storage and Usage Locations
Avoid using or placing this unit in the following
places.
It might result in malfunctions or failure.
0
Hot
or
cold places that are beyond the allowable operating
temperature range (0 °C to 40 °C (32 °F to 104°F)).
0
Locations beyond or below the allowable operating
humidity range of 20 %RH to 90 %RH. (Condensation is
not allowed)
0
Near equipment that emits strong magnetic fields, such as
transformers or motors.
0
Near equipment that emits radio waves, such as
transceivers and mobile phones.
0
Locations with excessive dust and sand.
0
Locations prone to moisture such as window side.
0
Locations that are subjected to radiation, X-rays, salt attack
or corrosive gases.
0
Places subject to smoke or vapor such as near a cooking
stove
0
Places subject to strong vibrations or unstable surfaces
In a parked car under direct sunlight or near a
heater for long hours
Protect this unit against penetration of dust
when using it in a place subject to sandy dust.
Handling Precautions
Do not rub against or press the surface of the
touch panel with a knife or a sharp object.
Do not apply excessive force to this unit; do not
lift this unit while holding the control lever.
Maintenance
Turn off the power before performing any
maintenance.
Wipe using a soft cloth. Wiping with thinner or
benzene may melt or tarnish its surface.
For tough stains, wipe using a cloth that is
dipped into a neutral detergent diluted with
water, followed by wiping with a dry cloth.
Cautions on Installing this Unit on a
Desktop
Install this unit such that it does not fall from the
desktop due to vibrations.
Energy Saving
When this unit is not in use, set the Power
switch to “OFF” to reduce power consumption.
Main Features
7
Getting Started