User's Manual
34
Picture Shift Setting
a Project the image on the screen
b Press the [MENU] button
● The main menu is displayed on the screen.
c Press the [J/K] buttons to select ASetupB, followed
by pressing the [ENTER] button
● The ASetupB menu appears on the right side of the screen.
d Press the [J/K] buttons to select APicture ShiftB,
followed by pressing the [H/I] buttons to move the
image upwards or downwards
● Set value in the positive (+) direction to move the image upwards and
negative (-) direction to move downwards.
e Press the [MENU] button to end
● The menu will disappear from the screen.
When projecting images with black bands at the top and bottom (cinema image), use this to move the image up
or down while retaining one of the black bands at the upper or lower end.
ON
ENTER
OFF
CHP
TEST
MENU EXIT
LIGHT
OPERATE
HIDE
PRESET
ZOOM
T
W
FOCUS
TW
ZOOM
+
-
FOCUS
MENU EXIT
OPERATE
ON
OPERATE
OFF
HIDE
RS232C Rx
Tx
b, e
c, d
b, e
c, d
E.g.: When APicture ShiftB value is changed from “0” to “30”
Image Adjust
Setup
Options
Information
Green
Blue
Red
Gamma
Normal A CustomB
Color Temp.
Test Pattern
User2User1D65
ENTER
Pixel Adjust
ENTER
Mask
Off5%2.5%
Picture Shift
Flip V
On Off
On
0
Off
Flip H
Menu Position
Image Adjust
Options
Information
Setup
Image Adjust
Options
Information
Setup
Mask
Off5%2.5%
Flip V
On Off
On
Off
Flip H
Menu Position
Picture Shift
30
2.35:1 Cinema Image
DLA-HD10_EN-FR.book Page 34 Thursday, November 10, 2005 12:54 PM