Compact Component System Instructions
Table Of Contents
- Introduction
- Getting Started
- Basic Operations
- Setting the Clock and Daily Timer
- Playing Back from iPod
- Playing Back from USB mass storage class device
- Playing Back from the PC
- Playing Back from Other Equipment
- Troubleshooting
- Specifications
- Introduction
- Préparation
- Opérations de base
- Réglage de l'horloge et de la minuterie de réveil
- Lecture à partir d'un iPod
- Lecture à partir d'un appareil de stockage de masse USB
- Lecture à partir du PC
- Lecture à partir d'autre matériel
- Dépannage
- Spécifications
19
Playing Back from Other Equipment
To connect other equipment
By using a stereo mini plug cord (not supplied), you can connect other equipment with analog audio
output jacks, such as Digital Audio Player, a TV, etc.
• Refer to the manuals supplied with the other equipment.
NOTE
• Always set volume to the minimum level when connecting or disconnecting the other equipment.
To select other equipment for the source
To adjust the sound input level from other equipment
You can adjust the sound input level from the connected equipment, if the incoming signal is too
small or too large.
Select AUX for the source.
• AUX can be selected also by the FUNCTION button on the unit.
1
Select AUX for the source.
2
Press and hold until the indicator appears on the display. Then press and hold until setting is
changed.
LEVEL 1:
Decreased input level. Suitable for equipment with high output level (such as a DVD player).
LEVEL 2:
Ordinary input level (factory setting). Suitable for equipment with low output level (such as a portable audio
device).
Stereo mini plug cord (not supplied)
AUX
(front panel)
Portable audio
device, Game
machine, etc.
USB AUDIO
AUX
LEVEL 1
LEVEL 2
NX-PS1[C].BOOK Page 19 Tuesday, October 31, 2006 5:46 PM