Compact Component System Instructions
Table Of Contents
- Introduction
- Getting Started
- Basic Operations
- Setting the Clock and Daily Timer
- Playing Back from iPod
- Playing Back from USB mass storage class device
- Playing Back from the PC
- Playing Back from Other Equipment
- Troubleshooting
- Specifications
- Introduction
- Préparation
- Opérations de base
- Réglage de l'horloge et de la minuterie de réveil
- Lecture à partir d'un iPod
- Lecture à partir d'un appareil de stockage de masse USB
- Lecture à partir du PC
- Lecture à partir d'autre matériel
- Dépannage
- Spécifications
15
Playing Back from USB mass storage class device
This System is equipped with a USB MEMORY terminal on the front panel. You can connect a
USB mass storage class device such as a USB flash memory device, Digital Audio Player (DAP),
etc. to this System.
This System cannot recognize a USB mass storage class device whose rating exceeds 5V/500mA.
To connect the USB mass storage class device
When connecting a USB mass storage class device, refer also to its manual.
• When disconnecting the USB mass storage class device, make sure that the System is in the stop condition.
Basic Operations
For MP3/WMA playback
Button
Function
On the Unit On the remote
Starts playback / Pauses
Stops playback
Increases the track numbers.
Press and hold : Fast forward search
Decreases the track numbers.
Press and hold : Fast reverse search
(Press this button during playback to jump back to the beginning of
the track.)
1
Set Number select mode.
2
Input the Group number, then
input the Track number.
STANDBY
FUNCTION
AUX
PHONES
USB
MEMORY
DAP
or
or
Track number
Group number
NX-PS1[C].BOOK Page 15 Tuesday, October 31, 2006 5:46 PM