Operation Manual

ManualsBrandsJVC ManualsSpeaker SystemNX-F7

53

Convenient functions of TV viewing

■ IMPORTANT

• Slide the remote control mode

selector to the lowest position.

1 Press [STB].

2 Hold down [STB/VCR F].

• Hold down [STB/VCR F] until you finish

step 5.

3 Press [ENTER] and release.

4 Press number buttons to enter the

manufacturer code.

Examples:

For an Amstrad STB: Press [0], then [3].

For a Triax STB: Press [3], then [0].

When the manufacturer of your STB has 2 or more

codes, select the manufacturer codes in turn and

find the one that operates the STB and the remote

control properly.

The initial code setting is “01 (JVC)”.

5 Release [STB/VCR F].

NOTE

• It is recommended that you slide the remote

control mode selector to [AUDIO] after using this

function. Most of the other functions can be used

when the remote control mode selector is at

[AUDIO].

• Manufacturer codes are subject to change with-

out notice. You may not be able to operate the

STB produced by the manufacturer.

• After replacing the batteries of the remote con-

trol, set the manufacturer code again.

Before the STB operation, select the remote con-

trol mode for the STB.

■ IMPORTANT

• Slide the remote control mode

selector to the lowest position.

1 Press [STB].

2 Operate the remote control by

pointing it at the STB.

NOTE

• When the remote control mode selector is slid to

the lowest position and [STB] is pressed, some

buttons may not work.

• It is recommended that you slide the remote

control mode selector to [AUDIO] after using this

function. Most of the other functions can be used

when the remote control mode selector is at

[AUDIO].

Operating an STB using the

remote control

Manufacturer

Code

Manufacturer

Code

JVC 01, 02 Mascom 32

Amstrad

03, 04, 05,

06, 31

Maspro 13

BT 01 Nokia 24, 26, 33

Canal+ 20 Pace 10, 25, 31

Canal Satellite

20 Panasonic 15

D-Box 24 Philips 09, 23

Echostar

17, 18, 19,

21

Saba 35

Finlux 11 Sagem 22, 29

Force 28 Salora 11

Galaxis 27 Selector 29

Grundig 07, 08 Skymaster 12, 36

Hirschmann

07, 17, 37 Thomson 35

ITT Nokia 11 TPS 22

Jerrold 16 Triax 30

Kathrein 13, 14, 34 Wisi 07

Luxor 11

Setting the manufacturer code

Remote control button Usage

[STB/VCR F] Turns on/off the STB.

[CH +/

–

] Changes channels.

Number buttons (1-9, 0,

10)

Selects the channels.

Using the remote control for the

STB operation

Convenient functions of TV viewing (continued)

NX-F3_NX-F7[B].book Page 53 Tuesday, January 15, 2008 4:39 PM