Operation Manual
52
Convenient functions of TV viewing
You can operate your TV, set-top box (STB) and
video cassette recorder (VCR) using the remote
control of this system.
■ IMPORTANT
• Slide the remote control mode
selector to the lowest position.
1 Press [TV].
2 Hold down [TV F].
• Hold down [TV F] until you finish step 5.
3 Press [ENTER] and release.
4 Press number buttons to enter the
manufacturer code.
Examples:
For a Hitachi TV: Press [0], then [7].
For a Toshiba TV: Press [2], then [9].
When the manufacturer of your TV has 2 or more
codes, select the manufacturer codes in turn and
find the one that operates the TV and the remote
control properly.
The initial code setting is “01 (JVC)”.
5 Release [TV F].
NOTE
• It is recommended that you slide the remote
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
• Manufacturer codes are subject to change with-
out notice. You may not be able to operate the
TV produced by the manufacturer.
• After replacing the batteries of the remote con-
trol, set the manufacturer code again.
Before the TV operation, select the remote control
mode for the TV.
■ IMPORTANT
• Slide the remote control mode
selector to the lowest position.
1 Press [TV].
2 Operate the remote control by
pointing it at the TV.
.
NOTE
• When the remote control mode selector is slid to
the lowest position and [TV] is pressed, some
buttons may not work.
• It is recommended that you slide the remote
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
Operating a TV using the
remote control
Manufacturer
Code
Manufacturer
Code
JVC 01
Nordmende
13, 14, 18,
26, 27, 28
Akai 02, 05 Okano 09
Blaupunkt 03 Orion 15
Daewoo 10, 31, 32 Panasonic 16, 17
Fenner 04, 31, 32 Philips 10
Fisher 05 Saba
13, 14, 18,
26, 27, 28
Grundig 06 Samsung
10, 19, 32,
35, 36, 37,
38
Hitachi 07, 08 Sanyo 05
Inno-Hit 09 SEG 15
Irradio 02, 05 Schneider 02, 05
Loewe 10 Sharp 20, 39, 40
Magnavox 10 Sony
21, 22, 23,
24, 25
Mitsubishi 11, 33
Telefunken
13, 14, 18,
26, 27, 28
Miver 03 Thomson
13, 14, 18,
26, 27, 28,
30
Nokia 12, 34 Toshiba 29
Setting the manufacturer code
Remote
control button
Usage
[TV F]
Turns on/off the TV.
[TV/VIDEO]
Changes between the TV and
video input.
[CH +/
–
] Changes channels.
[TV VOL +/
–
] Adjusts volume.
Number but-
tons (1-9, 0,
100+)
Selects the channels.
[TV RETURN]
Changes between the previously
selected channel and the current
channel.
Using the remote control for the TV
operation
NX-F3_NX-F7[B].book Page 52 Tuesday, January 15, 2008 4:39 PM