OperationManual
Table Of Contents
- Getting Started
- Set up
- Operate
- Adjust/Set
- Adjusting the Image Quality
- Adjusting the Output Value of the Projected Image (Gamma)
- Fine-tuning to the Preferred Gamma Setting
- Reducing the After-image of Fast-moving Images (Blur Reduction)
- Adjusting the Contrast (Lens Aperture)
- Correcting Uneven Illumination (Uniformity Correction)
- Adjustments and Settings in the Menu
- Other Adjustments and Settings
- Maintenance
- Troubleshooting
- Others
Color
For adjusting the color density of the video image.
0
Setting range: -50 (lighter) to +50 (deeper)
Tint
For adjusting the hue of the video image.
0
Setting range: -50 (reddish) to +50 (greenish)
Input Signal
Input Level
For setting the dynamic range (gradation) of the video input.
0
If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become
underexposed.
Setting Description
0-255 (PC) Select this setting if you are inputting PC signals (dynamic range: 0 - 255).
16-235 (Video) Select this setting if you are inputting video signals (dynamic range: 16 - 235).
Color Space
For setting the color space of the input signal.
Setting Description
YCbCr (4:4:4) Select this setting when inputting YCbCr (4:4:4) video signals.
YCbCr (4:2:2) Select this setting when inputting YCbCr (4:2:2) video signals.
RGB Select this setting when inputting RGB video signals.
34
Adjust/Set