OperationManual
Table Of Contents
- Getting Started
- Set up
- Operate
- Adjust/Set
- Adjusting the Image Quality
- Adjusting the Output Value of the Projected Image (Gamma)
- Fine-tuning to the Preferred Gamma Setting
- Reducing the After-image of Fast-moving Images (Blur Reduction)
- Adjusting the Contrast (Lens Aperture)
- Correcting Uneven Illumination (Uniformity Correction)
- Adjustments and Settings in the Menu
- Other Adjustments and Settings
- Maintenance
- Troubleshooting
- Others
Installation
Lens Control
Focus / Zoom / Shift
For adjusting the lens according to the projection position.
Æ “Adjusting the Lens According to the Projection Position” (P. 19)
Image Pattern
For setting whether to display the lens adjustment pattern.
Setting Description
On Displays the lens adjustment pattern.
Off Displays external signals, and does not display the lens adjustment pattern.
Lock
For setting whether to lock or unlock the lens.
Setting to “On” to lock the lens allows you to preserve the adjustment status of the lens.
Setting Description
On Locks the lens to prevent any erroneous operation on the adjustments.
Off Does not lock the lens.
0
When “On” is selected, all lens control functions other than “Lens Memory Select” cannot be operated.
Lens Memory Select / Lens Memory Save / Lens Memory Name Edit
The Focus, Zoom, and Shift adjustment data can be saved or retrieved, allowing you to easily switch and project images
with different aspect ratio (screen size).
Æ “Saving and Retrieving Adjustment Data” (P. 20)
36
Adjust/Set