OperationManual

Remote Control
A
C [ON]
Turns on the power. (P.
18)
B
B
[STAND BY]
Turns off the power. (P. 18)
C
[HIDE]
Hides the image temporarily.
(P. 18)
D
[INFO.]
Displays the information menu.
(P. 43)
E
[INPUT]
For selecting an input from [HDMI 1]
and [HDMI 2]. (P. 18)
F
[LENS CONTROL]
For adjusting focus, zoom, and shift.
(P. 19)
G
[LENS MEMORY]
Switches between saving,
retrieving, and editing of the lens
memory. (P. 20)
H
[RGB SOLO]
Switches the color component to be
projected to “All Colors (Full
Colors)”, “Red Component only”,
“Green Component only” or “Blue
Component only”.
(P. 44)
I
[CONTRAST]
For adjusting the contrast.
(P. 33)
J
[BRIGHTNESS]
For adjusting the brightness.
(P. 33)
K
[COLOR]
For adjusting the color. (P. 34)
L
[DIM.]
Pressing the button adjusts the
brightness to approximately 20 %
(depending on the gamma setting).
Pressing the button again restores
the original brightness.
(P. 44)
M
[LIGHT]
Illuminates the buttons on the
remote control.
N
[JKH I] keys
For selecting an item.
O
[OK]
Confirms a selected item.
P
[MENU]
Displays the menu,
or hides the menu if it is displayed.
Q
[BACK]
Returns to the previous menu.
R
[PICTURE MODE]
Switches the Picture mode to
[DYNAMIC], [SRGB], [DCI], or
[USER1] to [USER6]. (
P. 23)
S
[GAMMA]
For setting the gamma level.
(P. 25)
T
[COLOR TEMP.]
For setting the color temperature.
(P. 33)
U
[RGB PARADE]
Displays the waveform monitor for
red, green, blue and all colors at the
bottom of the screen. (P. 44)
V
[C.GAMUT]
Displays the colors that are not
correctly displayed by the projector
with the current Picture mode in
colors. Colors that are correctly
displayed appear in monochrome.
(P. 44)
INPUT
PICTURE MODE
INFO. HIDE
DYNAMIC SRGB DCI
USER1 USER2 USER3
USER5 USER6
LENS
CONTROL
LENS
MEMORY
RGB
SOLO
RGB
PAR ADE
COLOR
TEMP.
GAMMA
C.GAMUT
DIM.
USER4
BRIGHTNESS CONTRAST COLOR
B
R
T
U
V
D
C
J
M
A
F
E
I
G
H
K
L
N
O
P
Q
S
12
Getting Started