LT-42DS9BU_EN.
LT-42DS9BU_EN.
LT-42DS9BU_EN.book Page 1 Friday, February 22, 2008 2:19 PM INSTRUCTIONS z S90 does not support digital channels (Digital terrestrial broadcasting (DVB-T)). To watch digital channels, a Digital terrestrial broadcasting (DVB-T) compatible tuner is required. nf Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-oflife.
LT-42DS9BU_EN.book Page 2 Friday, February 22, 2008 2:19 PM Warning 2 Please follow all the guidelines below Follow this manual regarding setup! Do not allow the TV to fall! z Do not rest your elbows on, or allow children to hang from the TV. There is a risk that the TV will fall and cause injuries. z Connect only to a 220 - 240 V, 50 Hz AC outlet.
LT-42DS9BU_EN.book Page 3 Friday, February 22, 2008 2:19 PM Contents Please read “Getting started” (P. 8 - 17). The main descriptions are in the following pages.
LT-42DS9BU_EN.book Page 4 Friday, February 22, 2008 2:19 PM Remote control The functions of the remote control buttons are explained as follows. This remote control can be configured to operate up to four different devices simply by changing the remote code. “Configuring your remote control” (P. 24) 4 Return to TV. (S90 only) Switch between digital / analogue channels. (DS9 only) Mute. Display on-screen menu. “Customising your TV” (P. 26) Turn on / off (standby) the TV.
LT-42DS9BU_EN.book Page 5 Friday, February 22, 2008 2:19 PM Display hidden information when viewing teletext. (P. 21) Display hidden information when viewing teletext. (P. 21) Switch between TV / Radio when watching digital channels. (DS9 only) Enlarge the text when viewing teletext. (P. 21) Choose a favourite channel when viewing analogue channels. (P. 19) Display sub-pages when viewing teletext. (P. 20) Switch briefly from teletext to TV when viewing teletext. (P. 21) Change the aspect ratio. (P.
LT-42DS9BU_EN.book Page 6 Friday, February 22, 2008 2:19 PM Names and functions of parts 6 Touch sensor panel operation Change channel. Volume Turn on / off (standby) the TV. Remote control sensor Menu operation. Power lamp Eco Sensor ON: Lit g“What is “Eco Sensor”?” (P. 34) OFF: Unlit z When “Power Lamp” is set to “Off”, the power lamp will not light up. g “Power Lamp” (P. 29) z The power lamp will blink before the “Record” timer starts to function.
LT-42DS9BU_EN.book Page 7 Friday, February 22, 2008 2:19 PM When attaching the TV to the wall 1 Seal up the two holes at the bottom of the TV using the plates provided. Peel off the protection films on the plates. Then peel the plates from the paper and stick them on the holes.
LT-42DS9BU_EN.book Page 8 Friday, February 22, 2008 2:19 PM Getting started 8 Please read P. 9 - 17 of this manual to set up your TV. Check accessories Remote control S90: RM-C1932 DS9: RM-C1931 “AAA/R03” Batteries (For confirming the TV works) Cleaning cloth (For details on using the cleaning cloth, see P. 7.) Insert the batteries Use two “AAA/R03” dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct.
LT-42DS9BU_EN.book Page 9 Friday, February 22, 2008 2:19 PM Note z Please read the user manuals of each device before setting up. z Connecting cables are not supplied with this TV. z You can tidy the cables using the cable clamp on the back of the stand. DS9 only B A C DIGITAL AUDIO OUT EXT-2 EXT-3 Not available. (For service adjustments) AUDIO OUT EXT-1 CI (Common Interface) slot Refer to “Watch pay-TV digital channels (DS9 only)” (P.
LT-42DS9BU_EN.book Page 10 Friday, February 22, 2008 2:19 PM Getting started Choose your best connection You can connect your TV to other devices in seven different ways. Check your devices and choose the best connection. In addition, please read “Notes” before using. Picture quality Other devices Connecting cables Please do not change any of the menu settings before completing the “Initial settings” (P. 13). Otherwise, the “Initial settings” will not start automatically.
LT-42DS9BU_EN.book Page 11 Friday, February 22, 2008 2:19 PM D SCART (Euroconnector) EXT-2 SCART cable Select the dubbing source in “Ext Setting”. (P. 31) Change the EXT-3 setting from “ ” (component) to “ ” (composite). (P. 31) Video and audio Video and audio cable Good EXT-3: V, L, R jacks Connecting cables Connect to your TV Audio cable AUDIO OUT Available signals Output z Audio L / R (analogue) Notes You cannot listen to the sound from a device with connection A and B.
LT-42DS9BU_EN.book Page 12 Friday, February 22, 2008 2:19 PM Getting started Connecting the aerial Connect the aerial Power supply for the indoor aerial (DS9 only) When using an indoor aerial which requires external power, set “Antenna Power” to “On” in step 3 of “Initial settings” (P. 14). The TV will supply DC 5V, 50mA (max) from the aerial socket through the cable to the aerial. AERIAL z After all the connections have been made, insert the plug into an AC outlet.
LT-42DS9BU_EN.book Page 13 Friday, February 22, 2008 2:19 PM Initial settings (S90) The initial settings will begin automatically when the TV is turned on for the very first time. Follow the on-screen instructions to perform the settings. 1 4 Auto Program Country United Kingdom Deutschland France Italia España Nederland Belgium Turn on z If the remote control doesn’t work, confirm that the mode is set to “TV”.
LT-42DS9BU_EN.book Page 14 Friday, February 22, 2008 2:19 PM 14 Getting started Ini Initial settings (DS9) The initial settings will begin automatically when the TV is turned on for the very first time. Follow the on-screen instructions to perform the settings. 1 3 Confirm that the aerial power supply is set to “Off”. Select “On” only when using an aerial which requires external power. (P.
LT-42DS9BU_EN.book Page 15 Friday, February 22, 2008 2:19 PM Confirm the language for menus (excluding the DTV menus) 6 Finish Language English Français Deutsch Italiano Castellano Nederlands Dansk Norsk Svenska Suomi Română 5 Polski Magyar Português Català Türkçe z If you want to change the language, select a language and press the “OK” button.
LT-42DS9BU_EN.book Page 16 Friday, February 22, 2008 2:19 PM Getting started Editing analogue channels Move You can edit the analogue channel list.
LT-42DS9BU_EN.book Page 17 Friday, February 22, 2008 2:19 PM Manual Register a new channel TV/DTV Manual 䡵 To edit digital channels g WATCHING DIGITAL CHANNELS P. 9 䡵 To register a digital channel manually g WATCHING DIGITAL CHANNELS “Service Scan” (P. 14) PR AV 01 02 03 04 05 06 07 08 09 ID ______ ARD CH/CC CH 02 CH 03 CH 04 CH 05 CH 06 CC 01 CC 02 CC 03 CC 04 (B / G) z If necessary, press X to change the broadcasting system. g“Receivable broadcast systems” (P.
LT-42DS9BU_EN.book Page 18 Friday, February 22, 2008 2:19 PM Enjoy your new TV! Watching analogue channels PAGE 21 PAGE PR List PR ID AV _ _ _ _ _ _ 01 ARD 02 03 04 05 06 07 08 09 18 19 Watching videos / DVDs Customising your TV 䡵 Picture settings (Picture Mode, Features, etc.) PAGE Viewing teletext 20 PAGE 26 Picture 䡵 Sound settings (Stereo/t-u, 3D Cinema Sound, etc.) 䡵 Features settings (Sleep Timer / Child Lock, etc.) 䡵 Set Up settings (Auto Program, Language, etc.
LT-42DS9BU_EN.book Page 19 Friday, February 22, 2008 2:19 PM Watching analogue channels 1 Note z To soften the picture for daily use, change the setting in “Picture Mode” g “Picture Mode” (P. 26) Turn on The power lamp on the TV lights. Channel information and clock z If the remote control doesn’t work, confirm that the mode is set to “TV”. Channel information z Press again to turn the screen off and put the TV into standby mode. z To completely turn off the TV, unplug the power plug.
LT-42DS9BU_EN.book Page 20 Friday, February 22, 2008 2:19 PM Viewing teletext 20 This TV can display TV broadcasts and teletext on the same channel in two windows. 1 2 When watching TV F.T/L Bookmark your favourite page 1 Display your favourites list 2 Select a coloured button to save your page to Enter a teletext page TV TEXT (red) (green) (yellow) (blue) 䡵 Move up or down a page up 3 Enter the number of the page to save 4 Save TEXT down F.
LT-42DS9BU_EN.book Page 21 Friday, February 22, 2008 2:19 PM Watching videos / DVDs Hold the current page 1 䡵 Release g Press “ Select the video source ” again Ext Mode A select Ext Mode 0 1 2 3 4 5 6 7 Reveal hidden pages Display hidden information (answers to quizzes, etc.) ATV EXT-1 EXT-2 EXT-3 HDMI1 HDMI2 HDMI3 DTV B watch DS9 only E.g.
LT-42DS9BU_EN.book Page 22 Friday, February 22, 2008 2:19 PM Useful functions 22 Zoom 3D Cinema Sound Change the aspect ratio Enjoy ambient sound 1 On 2 Select the aspect ratio Auto Regular Panoramic 14:9 Zoom 16:9 Zoom 16:9 Zoom Subtitle Full Full Native Slim Panoramic Zoom 3 3D Cinema Sound Off z You can adjust the “3D Cinema Sound” settings in the “3D Cinema Sound” menu. (P. 28) z “3D Cinema Sound” does not work with headphones.
LT-42DS9BU_EN.book Page 23 Friday, February 22, 2008 2:19 PM Sleep Timer Change the sound mode or language (analogue channels) Set a time for the TV to turn off automatically 1 1 2 2 Select the sound mode or language Set the time Sound Bass Treble Balance Hyper Sound 3D Cinema Sound MaxxBass Sleep Timer A select A select 0 Off Off B set 120 Off B set ENGLISH IMPORTANT PREPARE Stereo/t-u 䡵 Cancel g Set the time to “0”. 䡵 Remaining time g Display this menu again.
LT-42DS9BU_EN.book Page 24 Friday, February 22, 2008 2:19 PM Configuring your remote control 24 You can configure your TV’s remote control to operate your other devices. Configure your remote control. 1 Turn on the device manually. 2 Switch the remote control mode to a mode that matches your device. Refer to the table on the right to select an appropriate mode. TV STB DVD z The indicator lights for 3 seconds each time the remote control is operated.
LT-42DS9BU_EN.book Page 25 Friday, February 22, 2008 2:19 PM 䡵 Change the remote control mode This function searches through the codes one by one, beginning from the first code in the list. 1 Turn on the device manually. 2 Switch the remote control mode to a mode that matches your device. Press 䡵 Turn on/off the device 䡵 Navigate the menus Display top menu to select the mode. Display menu OK 3 Activate the search code function. Hold down and until the mode indicator blinks.
LT-42DS9BU_EN.book Page 26 Friday, February 22, 2008 2:19 PM Customising your TV 1 2 26 Display the menu bar Picture Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Hue Colour Temp. Features Display the desired menu select Picture Standard Normal Picture Mode (DTV menu) g WATCHING DIGITAL CHANNELS (DS9 only) P. 8 - 15 3 Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Hue Colour Temp.
LT-42DS9BU_EN.book Page 27 Friday, February 22, 2008 2:19 PM Features Digital VNR DigiPure Movie Theatre Colour Management Picture Management Smart Picture Dynamic Backlight MPEG Noise Reduction Colour System 4:3 Auto Aspect Off Off Auto On On On On On MPEG Noise Reduction Note z “Smart Picture” is not available when “Picture Mode” is set to “Bright” (P. 26).
LT-42DS9BU_EN.book Page 28 Friday, February 22, 2008 2:19 PM Customising your TV Sound 3D Cinema Sound Sound Adjust “3D Cinema Sound” setting to your liking Surround: Adjust the surround level (Low / Mid / High) Bass Boost: Off Auto Volume Control Emphasize the bass sound (Low / Mid / High) Auto Volume Control: Maintains a uniform sound volume even if the sound becomes loud suddenly during commercial breaks etc. (On / Off) z To turn on / off the “3D Cinema Sound”, refer to “3D Cinema Sound” (P. 22).
LT-42DS9BU_EN.book Page 29 Friday, February 22, 2008 2:19 PM Blue Back Features Sleep Timer Child Lock Blue Back Favourite Setting Power Lamp Eco Sensor On Favourite Setting On Off Favourite Setting Sleep Timer Timer for turning off the TV (P. 23) Child Lock Stop children from watching specific channels (analogue channels) 䡵 Lock a channel Set an “ID No.” A select a number Display the menu Set ID No. 0 0 0 B to the next column C set 0 z OK button does not work. Select a channel and lock it.
LT-42DS9BU_EN.book Page 30 Friday, February 22, 2008 2:19 PM Customising your TV Set Up Set Up Auto Program Edit / Manual Language Ext Setting HDMI-1 Audio Setting Attenuator Edit/Manual Note z “Attenuator” is not available for S90 and will not be displayed in the “Set Up” menu.
LT-42DS9BU_EN.book Page 31 Friday, February 22, 2008 2:19 PM 1 S-In z“ ” mark will appear at the selected “EXT”. z The device selection display will change from “E2” to “S2”.
LT-42DS9BU_EN.book Page 32 Friday, February 22, 2008 2:19 PM Troubleshooting 䡵 Analogue channels Severe noise or snow For problems concerning digital channels (DS9 only) g WATCHING DIGITAL CHANNELS P.
LT-42DS9BU_EN.book Page 33 Friday, February 22, 2008 2:19 PM Actions Left and right sound coming from one side of the speaker z If you hear both the left and right sound from one side of the speaker even after adjusting the speaker balance to one side, set “Hyper Sound” and “3D Cinema Sound” to “Off”. (P. 22, 28) Some functions do not work z It is not a malfunction. Depending on the situation, some function items will be displayed in black colour and will not work. (P.
LT-42DS9BU_EN.book Page 34 Friday, February 22, 2008 2:19 PM Technical information What is “ACI” (Automatic Channel Installation)? 34 䡵 Using “Demo” in “Eco Sensor”, you can display the effect of the “Eco Sensor” on the screen Some cable companies transmit a signal called “ACI” which contains information that allows TV channels to be registered automatically on your TV. When an ACI signal is received, “ACI Start / ACI Skip” appears in the “Auto Program” screen.
LT-42DS9BU_EN.
LT-42DS9BU_EN.book Page 36 Friday, February 22, 2008 2:19 PM Specifications Model 36 LT-42S90BU LT-42DS9BU Broadcasting systems Colour systems CCIR I / B / G / D / K / L (See “Receivable broadcast systems”, P. 34) TV broadcast: PAL, SECAM External input: PAL, SECAM, NTSC 3.58/4.
A5_RemoteControlCodes..fm Page I Monday, February 25, 2008 6:04 PM Remote control codes (P. 24) / Fernbedienungscode (S. 24) / Codes de télécommande (P. 24) / Codes afstandsbediening (pag. 24) / Códigos de mandos a distancia (P. 24) / Codici del telecomando (pag. 24) / Kaukosäätimen koodit (s. 24) / Fjernbetjeningskoder (s. 24) / Fjärrkontrollkoder (s.
A5_RemoteControlCodes..
A5_RemoteControlCodes..
A5_RemoteControlCodes..
A5_RemoteControlCodes..
A5_RemoteControlCodes..
A5_RemoteControlCodes..
A5_RemoteControlCodes..
A5_RemoteControlCodes..
A5_RemoteControlCodes..
A5_07_BLANK_LOGO.
A5_07_BLANK_LOGO.
A5_07_BLANK.
LT-42DS9BU_EN.
