Operation Manual

31 32
ENGLISH
What is T-V LINK?
What is ACI (Automatic Channel Installation)?
Receivable broadcast systems
PC Signals that can be displayed
Connect DVI devices
Licence
IMPORTANT! PREPARE USE
SETTINGS
TROUBLE?
Problem Actions page
Is the T-V LINK compatible device connected to EXT-2?
Is the SCART CABLE "Fully Wired"?
Is the T-V LINK compatible device turned on?
After confi rming all the conditions above,
press “OK” button again.
"FEATURE NOT
AVAILABLE" appears
32
32
-
Display Screen
Press to start ACI again.
If you still receive the "ACI ERROR" after numerous tries,
press
to cancel ACI.
"ACI ERROR"
appears
-
LCD panels use fi ne dots ("pixels") to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light,
or may light all the time.
Please understand that this is not a malfunction.
Black or white dots
appear on the screen
-
(continued)
It is not a malfunction. Some functions (dark background)
in the menu do not work depending on the situation.
Some functions
do not work
-
Functions
Wait a little for the signal to stabilize when switching
the signal format for an HDMI device.
Green and
distorted screen
-
Switch AUDIO in HDMI SETTING to ANALOGUE or DIGITAL.
No sound
26
Switch SIZE in HDMI SETTING to "1" or "2".
Wrong screen size
26
HDMI
T-V LINK allows the TV to share information easily with a connected T-V LINK compatible device.
By using T-V LINK :
*Macintosh* computers are not supported.
(Macintosh is a registered trademark of
Apple Computer, Inc.)
Resolution
640 x 480 (VGA) 1024 x 768 (XGA)
Vertical frequency (Hz)
60.0 60.0
Horizontal frequency (kHz)
31.5 42.0
Technical information
You can send the channel information programmed on the TV to the T-V LINK compatible device, so that both
the TV and the external device have the same channel settings. When connecting a new external device,
channel information is loaded into it, allowing channel setup to be completed very quickly. For more details,
refer to the external device's manual.
You can easily record the TV programme you are viewing on a T-V LINK compatible device by using the
"DIRECT REC" feature. For more details, refer to the external device's manual.
Some cable companies transmit a signal called ACI which contains information that allows TV channels to be
registered automatically on your TV.
When an ACI signal is received, "ACI START / ACI SKIP" appears in the "AUTO PROGRAM" screen.
Depending on the country selected during "AUTO PROGRAM", the receivable broadcast system differs.
UNITED KINGDOM: Receive only PAL-I.
FRANCE: Can receive SECAM-L.
To receive SECAM-L in countries other than France:
1) Change the "COUNTRY" to "FRANCE" in "AUTO PROGRAM".
2) Press the "BACK" button to return to the menu and enter the channel using "INSERT" or "MANUAL".
If the signal doesn't appear, check that the vertical
frequency on the PC is set to 60Hz.
Connect a DVI device to EXT-5 (HDMI) using DVI-HDMI conversion cable. Connect analogue sound output of
the DVI device to L and R terminals in EXT-4.
Set AUDIO in HDMI SETTING to Analogue or AUTO (P. 26)
Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258, 5510752
and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
EXT-4, EXT-5 inputs and PC mode cannot be selected in the
sub-picture.
Some inputs cannot
be selected in the
sub-picture
-
Troubleshooting
LT-37&32&26S60_Eng.indd 31-32LT-37&32&26S60_Eng.indd 31-32 8/23/2005 11:50:35 AM8/23/2005 11:50:35 AM