Operating instructions

Downloaded from www.vandenborre.be
20
Other convenience functions
Selected Items
Setup hint
Country Set the country where you use this product.
Audio Language Select preferred audio language, if the current
watching DTV channel has more than one audio
language.
This option is not available for ATV channel.
•
Audio Language 2nd Select second preferred audio language, if the current
watching DTV channel does not have the language
set in Audio Language option above. If the Audio
Language 2nd set here is not transmitted in the
channel, the first displayed audio language in channel
information is automatically selected.
This option is not available for ATV channel.•
Channel Set Up See page 12.
OSD Language See page 12.
Power Management This feature controls the power management. If a
period of time is elapsed with no video signal in PC
mode, the power status is changed to stand by mode
automatically. When there is available video signal
again, the power status is returned to power on mode
automatically.
On / Off
Power On LED
To cancel the lighting of
indicator (P.7 (2)) during
operation, set to “Off”.
On / Off
Time Setup
Time Zone If the time displayed on the Channel Information
differs from the actual time, adjust the time offset until
the correct time zone is shown.
Normally, this would be done by selecting “Auto”.
•
Time
Auto Synchronization See page 13.
Date
Time
Timer To activate or deactivate the Power On Timer and
Power Off Timer.
Both On/Power
On Timer/Power
Off Timer/Off
Power On Timer Set the timer using / and Number buttons (0-9).
Power Off Timer
Sleep Timer Sleep timer switches the TV to standby after a defined
period of time.
To cancel the Sleep Timer, set to “Off”.
Off
10~120 Minutes
Auto Power Off When the Set and Remote key operation are not
operated with specified period by this setting(1/2/4
Hours), the power status is changed to stand by mode
automatically.
Off / 1 Hour / 2 Hours /
4 Hours
AV Input (LT-19.../LT-22...: AV1 Input)
AV1 Input (LT-26.../LT-32...)
AV2 Input
Only shown in AV-mode.
Auto Factory setting, normally OK.
RGB (only for AV1 input) when RGB is input.
CVBS when Composite is input.
S-Video When S-Video is input.
3BR1851A_EN.indd 203BR1851A_EN.indd 20 8/20/10 1:44:34 PM8/20/10 1:44:34 PM