ENGLISH FRANÇAIS LT-17X576 LT-23X576 3X576 LCD FLAT TELEVISION TELEVISEUR A ECRAN PLAT – LCD INSTRUCTIONS MANUEL D’INSTRUCTIONS 5030057131 0305TNH-TU
Important Safety Precautions ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside.
s !S AN h%.%2'9 34!2¤v PARTNER *6# HAS DETERMINED THAT THIS PRODUCT OR PRODUCT MODEL MEETS THE h%.%2'9 34!2¤v GUIDELINES FOR ENERGY EFFICIENCY IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING Always use the provided AC adapter and power cord. ENGLISH WARNING • Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down.
Point defects LCDs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light or may light all the time. Distance recommendations Avoid improper installation and never position the unit where good ventilation is impossible. When installing this TV, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture.
CONTENTS INITIAL SETUP...................................... 18 Installation..........................................................6 Using the stand ..................................................6 Putting the batteries into the Remote control.....7 Remove the terminal cover ................................7 Connecting the aerial and video cassette recorder (VCR)...................................................8 Connecting the power cord to the AC outlet ......8 Initial Setup.......................
Setting up your TV Installation Cautions for installation • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way. • The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow satisfactory cooling. See “Distance recommendations” on page 4. Using the stand This TV comes with a Table Top Stand already attached.
Setting up your TV Putting the batteries into the Remote control Use two AA/R6 dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct. ENGLISH • • • • Follow the warnings printed on the batteries. Battery life is about six months to one year, depending on your frequency of use. The batteries we supply are only for setting up and testing your TV, please replace them as soon as you need to.
Setting up your TV Connecting the aerial and video cassette recorder (VCR) Connecting the power cord to the AC outlet • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If you are connecting a AC adapter, follow in the diagram below. • Connect If you are connecting a VCR, follow in the diagram below. If you are not connecting a VCR, follow to the TV and to the AC outlet. Caution .
TV buttons and functions 1 Turn the TV on from standby mode Press the POWER button to turn the TV on from standby mode • Check that the AC plug on the power cord from the TV is connected to correctly AC outlet.
Remote control buttons and functions 1 POWER MUTING 11 12 2 100+ 3 4 INPUT VIDEO ASPECT STATUS MTS SLEEP TIMER 13 14 15 C.C. 16 5 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Muting button Number buttons ASPECT button VIDEO STATUS button C.C.
Remote control buttons and function Displaying the source information Adjust the volume buttons to adjust the volume. Press the VOLUME The volume indicator appears and the volume changes as you press the VOLUME buttons. Press the DISPLAY button to display the source information. Pressing the DISPLAY button changes the display as follows: Pressing the muting button again restores the previous volume level.
Remote control buttons and functions ASPECT function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ASPECT modes. REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen. The 4:3 picture will fill the screen from top to bottom, while black bars will appear to fill up the remaining space along the picture’s sides.
Remote control buttons and functions Using the PC PIP function A PC picture and TV or a video program from an external device can be watched at the same time. 1 Press the PIP button. Operating a JVC brand VCR or DVD player These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control.
Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. 4 Press the / buttons to choose the setting of that function • If you want to operate a function which appears only with its name, follow the descriptions of that function on the following pages.
PICTURE SETTING Refer to “Using the TV’s menu” (see page 14) for details of displaying the menu. You can select one of two COLOR TEMPERATURE modes (two tones of white) to adjust the white balance of the picture. Since white is the color which is used as a reference for all the other colors, changing the COLOR TEMPERATURE mode affects the appearance of all the other colors on the screen. PICTURE HIGH: A bluish white.
SOUND SETTING Refer to “Using the TV’s menu” (see page 14) for details of displaying the menu. SOUND BASS TREBLE BALANCE HYPER SURROUND : SELECT OFF : OPERATE Sound Adjustment You can adjust the sound to your liking. BASS: You can adjust the low tone of the sound. : weaker : strong TREBLE: You can adjust the high tone of the sound. : weaker : strong BALANCE: You can adjust the volume balance between the left and right speaker. : turn the left speaker’s volume level up.
FEATURES Refer to “Using the TV’s menu” (see page 14) for details of displaying the menu. FEATURES NOISE MUTING OFF FRONT PANEL LOCK OFF AUTO SHUT OFF OFF : OPERATE ENGLISH : SELECT NOISE MUTING You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON: This function is turned on. OFF: This function is turned off.
INITIAL SETUP Refer to “Using the TV’s menu” (see page 14) for details of displaying the menu. INITIAL SETUP LANGUAGE AUTO TUNER SETUP CLOSED CAPTION CHANNEL SUMMARY V-CHIP SET LOCK CODE : SELECT ENG/FRAN/ESP/ ʒᄾ CHANNEL SUMMARY 1 Press t he / buttons to choose the CHANNEL SUMMARY and press / to OPERATE. CHANNEL SUMMARY CH NO. SCAN OK : OPERATE LANGUAGE Select LANGUAGE and press the / buttons to choose the language.
INITIAL SETUP CLOSED CAPTION Select CAPTION or TEXT and press the / buttons to select a caption (CC1 to CC4) or text channel (T1 to T4). CC1 TEXT T1 : SELECT : OPERATE Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Your TV can access and display this information using the closed caption feature.
INITIAL SETUP Note: If you want to change the setup, move the cursor to the top column and change the lock icon to " - " by pressing or again. You may then select indivual categories to block. SET LOCK CODE Channel guard and V-Chip settings are protected by a fourdigit lock code. Your TV comes preset with a lock code of "0000". You may change the code to any four-digit number you wish. Movies Ratings : • NR - Not Rated This is a film which has no rating.
PC MENU (In PC mode only) This TV also has a number of functions on PC mode, you can operate using pc menus. PC MENU PC PICTURE POSITION COLOR TEMPERATURE: You can adjust the picture color mode. PC PICTURE SOUND OK : OPERATE 1024 X 768X60 HIGH A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. LOW: PC PICTURE POSITION You can adjust the picture settings as following functions.
PC MENU LT-17X576 / LT-23X576 Mode NO. 1 Mode Name H Freq. (kHz) Resolution V Freq. (Hz) VGA 70 HZ 31.469 640x350 70.087 VGA 60 Hz 31.469 640x480 59.941 SVGA 56 Hz 35.16 800x600 56.25 SVGA 60 Hz 37.879 800x600 60.317 XGA 48.363 1024x768 60.004 6 XGA 70 Hz 56.476 7 1024x768 MAC VGA 70.069 35 640x480 66.667 US TEXT 31.469 720x400 70.087 WXGA 47.73 1280x768 60 VGA 75 Hz 37.5 640x480 75 SVGA 75 Hz 46.875 800x600 75 XGA 75 Hz 60.023 1024x768 75.
Additional preparation Connecting external equipment Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram. Also, the equipment settings may need to change depending on the connection method. • Turn off all the equipment including the TV. • The “Specifications” on page 29 give the details of the EXT terminals.
Additional preparation Connecting headphones Connect the headphones with a stereo mini-jack (3.5 mm diameter) to the headphone socket at the TV. Connecting the PC Connect the PC with the D-SUB cable to the D-SUB in at the TV, and connect the sound device of PC with a stereo mini-jack to PC AUDIO IN. You can adjust the picture by AUTO SET UP function when the PC signal is output correctly, the AUTO SET UP function can optimize the picture position, clock and phase.
Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
Troubleshooting Other concerns • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the standby button to turn on the TV once again. If the TV goes back to normal, there is no problem. • It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a malfunction. This is the time required for the image to stabilize before it can be displayed.
ENGLISH 27
BT-51011-8 (0504) 28
Specifications Item Model LT-23X576 LT-17X576 US M TV system Color systems NTSC Channels and frequencies • Channels(on air) VHF 2 to 13, UHF 14 to 69 • Channels(CABLE) 1 to 125 Sound-multiplex systems US system Power requirements TV : 12V DC, Power source : AC 120V 60 Hz TV : 24V DC, Power source : AC 120V 60 Hz Power consumption 60 W, Standby : 1 W 120W, Standby : 1 W Screen size Viewable area 43.5 cm(measured diagonally) Viewable area 58.
30
ENGLISH 31
32
*6# #/-0!.9 /& !-%2)#! $IVISION OF *6# !MERICAS #ORP 6ALLEY 2OAD 7AYNE .EW *ERSEY 5 *6# #!.!$! ).
