IP Camera Instruction Manual

66
Operation
This product comes equipped with built-in viewer.
(TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only.
You can start up Built-in Viewer by entering the IP address in the Internet Explorer.
Built-in Viewer enables you to performing monitoring using JPEG or MPEG4 images, audio
transmission
(This feature is not available in VN-V25U) , and PTZ operations (TX).
䡵 Using the compressed JPEG format enables display of a series of still images as well as one-shot
recording of still images.
䡵 Using the compressed MPEG4 format enables display of MPEG4-encoded motion images.
䡵 You can send or receive audio using the JPEG/MPEG4 Viewer.
(This feature is not available in VN-V25U)
⽧AScreen ConfigurationB (A Page 66)
⽧Almage SettingsB (A Page 68)
⽧APTZ SettingsB (A Page 70)
⽧APTZ ControlB (A Page 72)
⽧AJPEG Viewer SettingsB (A Page 74)
⽧AMPEG4 Viewer SettingsB (A Page 76)
⽧AAudio Monitor SettingsB (A Page 78)
⽧AExiting the ViewerB (A Page 81)
Screen Configuration
Operation of Built-in Viewer
When the display or configuration of the opened screen appears strange, check
using the following procedures.
A
Click [Start]-[Control Panel]-[Display] and open the [Display Properties] window
B Click the [Settings] tab in the [Display Properties] windows and click the [Advanced] button
C Check that [DPI setting] in the [General] tab has become [Normal size(96DPI)]
D Otherwise, change the setting to [Normal size(96DPI)] and reboot windows
BA DCFEHGI
operation menu
A MENU OFF/
MENU ON
For showing/hiding the operation menu.
B Control Switches to the Control menu.
Click this button when you want to perform AImage SettingsB or APTZ
SettingsB (TX) or APTZ ControlB (TX)(A Page 74)
C Viewer Setup Switches to the Viewer Setup menu . Click this button when you want to
configure the settings of
A JPEG Viewer B , A MPEG4 Viewer B , A Audio Monitor B
or
A Operator Password B .