Operation Manual

Appendix

Special CleanUp Function

The CleanUp function serves the targeted deletion of data, with-

out using a PC.

IMPORTANT: Please use this function very care-

fully, because it is possible for data to be deleted

that will only need to be entered again manually af-

terwards.

The CleanUp function will be activated if the ‘C’ is pressed in the

JVC lettering of the Main Menu briefly, immediately after the start

tone following a soft reset

The CleanUp function offers 6 options:

1. Remove Installation Only

Removes the software installed from the ‘My Flash Disk’

memory [= part of the permanent memory in which the executa-

ble parts of the navigation software will be located following the

initial alignment (\My Flash Disk\Navigation)].

2. Remove MAP Only

Removes the digital maps from the ‘My Flash Disk’ memory (\My

Flash Disk\MapRegions).

3. Remove Preload Only

Removes the data needed for the installation of the navigation

software from the permanent memory (\My Flash Disk\Install).