KDC-BT92SD CD-RECEIVER INSTRUCTION MANUAL Before reading this manual, click the button below to check the latest edition and the modified pages. http://manual.kenwood.
Contents Before use Component names and functions General operation 5 7 8 Before Using Common Operation Menu List Operation iPod/iPhone Operation 9 15 Basic Operation File Search Play Mode USB and SD Setting Skip Search Direct Music Search Music CD/ Audio file Operation Basic Operation Tuner Setting Station Preset Memory Auto Memory Entry Preset Tuning Direct Access Tuning PTY (Program Type) Program Type Preset Changing Language for PTY Function 3 | KDC-BT92SD Bluetooth Audio Operation Operation
Before use Lens Fogging 2WARNING To prevent injury or fire, take the following precautions: To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Do not use this unit before canceling Demonstration mode! This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to (page 42).
2 1 3 General operation 5 4 6 Before Using Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. 1 Press the [VOL] knob to quit the demonstration mode when the messages “To cancel Demo press the volume knob” are displayed (approx. 15 seconds). 2 Turn the [VOL] knob to select “YES” and press the [VOL] knob.
iPod/iPhone Operation SRC MENU VOL 4 38 ¢ DISP Play Mode PRESET KCA-iP102 (optional accessory) is required to connect an iPod. iPod Basic Operation 3 Playing iPod • Connect an iPod When connected, the source is switched automatically and a song starts playing. • Select iPod source Press the [SRC] button. Select the “iPod” display. ✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob.
iPod/iPhone Operation Selecting the Search mode Direct Search Related Search Alphabet Search You can select the most suited search method for the desired song from 4 types of the Search mode. You can quickly search the desired song by specifying its Search item (artist, album, etc.) and character. Searches for music of the same artist or genre as the one being played. You can select a song by alphabet.
iPod/iPhone Operation Skip Search You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position. 1 2 Select iPod source 3 4 Press the [PRESET] button for at least 1 second. 5 Search for item Enter browsing mode Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > item. Enter Skip Search mode Turn the [VOL] knob and press it when the desired item is displayed.
USB device/ SD card Operation SRC MENU VOL DISP File Search PRESET Selecting the file you want to listen to from the device being played now. Cancelling Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. ⁄ USB device/ SD card 4 38 ¢ Display “Music” iPod • When you search a song in the File Search mode, the unit memorizes the position of the song being played after the search.
USB device/ SD card Operation USB and SD Setting Skip Search Function of remote control You can select following USB and SD Setting items. You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position. Searching the music by entering the file number. 1 2 Select USB or SD source 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”.
Music CD/ Audio file Operation Release MENU VOL DISP PRESET Fast Forwards or Fast Backwards Hold down the [4] or [¢] button. ⁄ • No sound is output while playing audio file. SRC 4 38 ¢ iPod Basic Operation Drop open the faceplate Press the Release button. Pause and Play Press the [38] button to pause or resume playback. Disc play • A disc inserted. When inserted, the source is switched automatically and a song is starts playing. When a CD is inserted, the “CD-IN” indicator is ON.
Tuner Operation 6 Tuner Setting You can select following Tuner Setting items. 4 ¢ Basic Operation 1 2 Select Tuner source 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”. 4 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed. Selecting Tuner source Press the [SRC] button. Select the “TUNER” display. ✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob.
Tuner Operation Function of remote control Direct Access Tuning Tuning in a desired radio station by entering the frequency. 1 2 3 Program Type Preset Selecting the Program Type below and searching for a station. Putting the Program Type in the Preset button memory and quick recall.
Getting Started of Bluetooth SRC VOL 7 The receiver is connected to a Bluetooth device, with “HF CONNECT” or “AUDIO CONNECT” displayed, and exits the easy pairing mode. 5 ⁄ Registering from Bluetooth devices (Pairing) • If an error code is displayed during paring, see (page 77). Easy pairing function 1 Enter easy pairing mode Press the [ ] button for at least 1 second.
Bluetooth Audio Operation SRC MENU VOL Play mode You can select a Play Mode, such as Random play and Repeat play. 4 38 ¢ 1 2 Select Bluetooth audio source 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Play Mode”. 4 Select the Play Mode Turn the [VOL] knob. Basic Operation Selecting Bluetooth Audio source Press the [SRC] button. Select the “BT AUDIO” display. ✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob.
Operation of hands-free phoning SRC MENU VOL DISP Call Waiting Making a Call Calling a Number in the Phone Book Answering Another Incoming Call with the Current Call Suspended 1 Enter Bluetooth mode Press the [ ] button. 2 Select a dialing method Turn the [VOL] knob and press it when the desired item is displayed. Dial the phone number in the phone book of your cell phone. If the phone book has not been downloaded to this unit, operate the cell-phone to download it.
Operation of hands-free phoning Calling a Number in the Call log Dial a Number Making a call by voice dialing 1 Enter Bluetooth mode Press the [ ] button. 1 Enter Bluetooth mode Press the [ ] button. You can make a voice call using the voice recognition function of the cell-phone. 2 Select the call log mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Outgoing Calls”, “Incoming Calls”, or “Missed Calls”.
Display Settings SRC MENU VOL PRESET Display Setting “ILLUMI MSC SYNC” You can select following Display Setting items. 1 4 ¢ Select the source Pressing the [SRC] button repeatedly switches source. ✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. Basic Operation 2 Switching display Press the [DISP] button. Enter Menu List mode Press the [MENU] button.
Display Settings Customization of 5-line Display Mode & 3-line Display Mode & iPod-like Display Mode You can customize the display of the 5-line display mode, 3-line display mode, and iPod-like display mode. 1 Select the source Pressing the [SRC] button repeatedly switches source. ✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. 2 Enter Menu List mode Press the [MENU] button.
Display Settings Customization of Clock Display Mode Illumination Color Selection Auxiliary Input Display Setting You can customize the display of the Clock Display mode. Selecting the Illumination Color of the panel. Selecting the display when changing to Auxiliary input source. 1 Select the source Pressing the [SRC] button repeatedly switches source. ✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob.
Clock and Other Functions Release 4 MENU VOL 5 SRC Set the Clock & Date setting items Turn the [VOL] knob and press it when the desired item is displayed. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. You can adjust the clock. Sets the display type of the clock and calendar. 1 Enter Menu List mode Press the [MENU] button. 2 Enter Clock adjustment mode Turn the [VOL] knob and press it when the desired item is displayed.
Clock and Other Functions Initial Settings “Forced CD-DA” You can select following Initial Setting items. 1 Select the Standby Pressing the [SRC] button repeatedly switches source. Select the “STANDBY” display. ✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. 2 Enter Menu List mode Press the [MENU] button. 3 Enter Initial Setting mode Turn the [VOL] knob and press it when the desired item is displayed.
Audio Adjustments “Sound Elevation” SRC MENU VOL “Volume offset” “Rear Mute” 4 38 ¢ “SubWoofer Mute”* “Preset”* Audio Control You can adjust following Audio Setting items. Display “SubWoofer Level”* “Preset Equalizer”* “Manual Equalizer”* “Pro Setup” “DSP Set”* “Car Type”* “Speaker Setting”* “X’Over”* “DTA Settings”* “Zone Control” “Sound Enhancements”* “Supreme” “HIGWAY-SOUND” “Space Enhancer” “Sound Realizer” 43 | KDC-BT92SD “Bass Boost”* Overview You can set subwoofer level.
Audio Adjustments Manual Equalizer Control Dual Zone System You can adjust following Equalizer Control items. Band Item Range “BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB “ON”/ “OFF” “B.Ex” Bass Effect “BAND2” (100 Hz) “GAIN” Band level -9 –+9 dB “BAND3” (160 Hz) “GAIN” Band level -9 –+9 dB “BAND4” (250 Hz) “GAIN” Band level -9 –+9 dB “BAND5” (400 Hz) “GAIN” Band level -9 –+9 dB “BAND6” (630 Hz) “GAIN” Band level -9 –+9 dB “BAND7” (1 kHz) “GAIN” Band level -9 –+9 dB “BAND8” (1.
DSP Setup SRC MENU VOL Speaker Setting X’Over Setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. Fine adjusting the following setting values corresponding to the X’Over values set in the section (page 47). Speaker “Front” 4 Range Speaker Size Front “O.E.M.
DSP Setup Listening Position Selection Listening Position Fine Adjustments The sound environment can be compensated in accordance with the selected position. According to the listening position, select the position from the following settings. Adjusting fine tuning of the speaker position compensation value specified at (page 47). Display “ALL” “Front-Left” “Front-Right” “Front” Compensation seat Not compensating.
DSP Setup Resetting of DTA Settings Audio Preset Memory Audio Preset Recall You can reset the DTA-compensated values to the factory settings. Registering the value setup by Sound Control. Recalling the sound setup registered by
Bluetooth Setup “Detailed Setup” Move to detailed item. “PIN Code Edit” Specify the PIN code required when registering this unit using the Bluetooth device. Refer to (page 56). “Auto Answer” Answer a call automatically after lapse of the preset time interval for automatic answer. “OFF”/ “0s” – “8s” – “99s” “Auto Automatically reconnects the selected Reconnect” Bluetooth device when radio wave becomes strong enough, even after it is disconnected.
Bluetooth Setup Registering Bluetooth Device (Pairing) 5 To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from Bluetooth devices 1 Turn on this unit Press the [SRC] button. 2 Start registering this unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select “KENWOOD BT CD/R-6P1” from the list of connected units.
Bluetooth Setup Deleting a Registered Bluetooth device You can delete a registered Bluetooth device. 1 Enter Bluetooth mode Press the [ ] button. ✍✍You can also select from “Settings” in Menu List mode. 2 Enter Bluetooth device deletion mode Turn the [VOL] knob and press it when the desired item is displayed. Select “BT Settings” > “Pairing” > “Device Delete”. “(name)” is displayed. 3 Select the Bluetooth device Turn the [VOL] knob. 4 Delete the selected Bluetooth device Press the [VOL] knob.
SMS (Short Message Service) MENU VOL DISP PRESET SMS (Short Message Service) SMS reply setting Return message setting The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. You can select a method to reply to the received SMS. You can select a return message (language). ¤ • To prevent car accidents, the driver should not read the SMS while driving.
SMS (Short Message Service) Creating an original message SMS manual reply You can create an original return message. You can manually reply to the received SMS. 1 Enter Bluetooth mode Press the [ ] button. When a new message arrives “SMS Reply” is displayed. 2 Enter SMS Message select mode Turn the [VOL] knob and press it when the desired item is displayed. Select “BT Settings” > “SMS” > “SMS Message”. 1 Turn the [VOL] knob to select “YES”, and then press the [VOL] knob.
Basic Operations of remote control VOL SRC ATT In Tuner source Hands-free phone control Preparing the remote control unit • Band select: [FM]/[AM] • Station select: [4]/[¢] • Recall preset stations: [1] — [0] and [ENT] Example: Making a call • Enter Bluetooth mode: [ ] • Select a dialing method: [5]/[∞] ➜ [ENT] • Number dial input: Input a digit: [0] – [9] Input “+”: [¢] Input “#”: [FM] Input “*”: [AM] Clear the entered phone number: [4] • Make a call: [DIRECT] Pull the battery sheet out from the re
Appendix About Audio file • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Playable USB device USB mass storage class • Playable USB device and SD card file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.
Appendix Menu List Common function items Display “Settings” “Clock & Date” “Clock Adjust” “City Select” “Time Synchronized” “Summer Time” “Sub Clock Adjust” “Date Adjust” “Date Mode Select” “DISP & ILLUMI” “Display Select” “Type Select” “Side Select” “Graphic Select” “Text Select” “Status” “Color Select” “Display Dimmer” “Contrast” “DISP N/P” “Text Scroll” “BT DVC Status” “ILLUMI Dimmer” “ILLUMI Effect” “ILLUMI MSC SYNC” “TUNER Settings” “News” “AF” “Regional” “Auto TP Seek” “TI” “DEMO Mode” Page – 39 – –
Appendix City list Continent Area City 69 | Continent City Hawaii Alaska Pacific Time Arizona Mountain Time Central Time Eastern time Indiana Atlantic Time Mid-Atlantic W.Central Africa Abu Dhabi Adelaide Amman Amsterdam Anchorage Ankara Athens Atlanta Auckland Baghdad Baku Bangkok Beijing Beirut Berlin Bogota Brasilia Brussels Bucharest Budapest Buenos Aires Cairo Cape Verde Is.
Accessories/ Installation Procedure Accessories • 2 1 ..........1 • ..........2 • 3 • 3 m ..........1 Installation Procedure 1 To prevent short circuits, remove the key from the 2 3 4 5 6 7 8 9 ignition and disconnect the - terminal of the battery. Make the proper input and output wire connections for each unit. Connect the wire on the wiring harness. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle.
Connecting Wires to Terminals Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Cable Colour Yellow Blue/White Orange/White Red Black Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Installation/Removing the Unit Installation Removing the hard rubber frame 1 Engage the catch pins on the removal tool and Functions remove the two locks on the upper level.
Installation/Removing the Unit Installation the Microphone Unit 1 Check the installation position of the microphone 2 3 4 (accessory 3). Remove oil and other dirt from the installation surface. Install the microphone. Wire the cable up to the unit with it secured at several positions using tape or the like. Accessory 3 Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! Cannot set up the rear speaker.
Troubleshooting Guide Hands-free ? ? The hands-free talk volume is low. The hands-free talk volume is set at a low level. The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. “Mic Gain” and “NR Level” (page 53). No sound is heard from the rear speakers. You are talking in the hand-free talk mode. No sound is heard from the rear speakers in the hands-free talk mode. ? No beep is heard at reception of an incoming call.
Specifications FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 1 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 2.5 μV/75 Ω Frequency response (±3.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC Svenska Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Suomi Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 2210022, Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands Härmed intygar Kenwood att denna KDC-BT92SD stär l överensstämelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som f
