Quick Start Guide
9
Data Size:  B6L (182 mm x 128 mm)
Book Size:  B6L (182 mm x 128 mm)
Bluetooth®
•  Depending on the Bluetooth version, operating system and the 
firmware version of your mobile phone, Bluetooth features may not 
work with this unit.
•  Be sure to turn on the Bluetooth function of the device to make the 
following operations.
•  Signal conditions vary depending on the surroundings.
 Connect the microphone
Connect the supplied microphone to the mirophone input terminal or 
microphone input jack on the rear panel.
Adjust the 
microphone 
angle
Secure using cord 
clamps (not supplied) 
if necessary.
 Pair and connect a Bluetooth device for the first time
1  Press B SRC to turn on the unit.
2  Search and select the name of your receiver (“KD-X470BHS”/
“KD-X370BTS”/“KD-X37MBS”/“KD-X270BT”/“KD-SX26BT”) on the 
Bluetooth device.
3  Perform (A) or (B) depending on what appears on the display.
  For some Bluetooth devices, pairing sequence may vary from the steps 
described below.
  (A) “[Device Name]” 
 “XXXXXX”   “VOL–YES”   “BACK–NO”
  “XXXXXX” is a 6-digit passkey randomly generated during each pairing.
    Ensure that the passkeys appear on the unit and Bluetooth device 
are the same.
    Press the volume knob to confirm the passkey.
    Operate the Bluetooth device to confirm the passkey.
  (B) “[Device Name]” 
 “VOL–YES”   “BACK–NO”
    Press the volume knob to start pairing.
   • If “PAIRING”   “PIN 0000” scrolls on the display, enter the PIN code 
“0000” into the Bluetooth device.
    •  If only “PAIRING” appears, operate the Bluetooth device to confirm 
pairing.
“PAIRING COMPLETED” appears when pairing is completed and “
” will light 
up when the Bluetooth connection is established.
 Answer a call
Press   or the volume knob.
•  To adjust the phone volume 
[00]
 to 
[35]
, turn the volume knob.
•  To end a call, press and hold   or the volume knob.
 Audio player via Bluetooth
1  Press B SRC repeatedly to select BTAUDIO.
  •  For KD-X270BT/KD-SX26BT: Pressing   enters BT AUDIO directly.
2  Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press the volume knob.
Select group or folder
Press 2 J / 1 K.
Reverse skip/Forward skip
Press S / T.
Reverse/Fast-forward
Press and hold S / T.
Repeat play
Press 4  repeatedly.
Random play
Press 3  repeatedly.
JS_JVC_QSG_KD_X470BHS_K_EN_1.indd 9JS_JVC_QSG_KD_X470BHS_K_EN_1.indd 9 5/28/2019 2:20:28 PM5/28/2019 2:20:28 PM










