Owner's Manual
Table Of Contents
- Instruction Manual
- Software License Agreement
- Important Notice concerning the Software
- Contents
- Before Use
- Basics
- Getting Started
- HD Radio™ Tuner (for KD-X470BHS)
- Radio (for KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT)
- USB/iPod
- AUX
- Pandora®
- Spotify
- SiriusXM® Radio (for KD-X470BHS/KD-X370BTS/KD-X37MBS)
- Using Other Applications
- Bluetooth®
- AMAZON ALEXA (for KD-X470BHS/KD-X370BTS/KD-X37MBS)
- Audio Settings
- Display Settings
- References
- Troubleshooting
- Installation/Connection
- Specifications
- Quick Start Guide
- When it is not required to detach the front control panel from the main unit, use the provided screw to attach the control panel to the main unit.
- Warranty
20
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Using Other Applications
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[REMOTE APP]
[SELECT] (For KD-X470BHS/KD-X370BTS/KD-X37MBS)
Selects the device ([IOS] or [ANDROID]) to use the application.
[IOS]
[YES]: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ; [NO]: Cancels.
If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/
iPod touch is connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID]
[YES]: Selects Android device to use the application via Bluetooth. ;
[NO]: Cancels.
[ANDROID
LIST]
Selects the Android device to use from the list.
• For KD-X470BHS/KD-X370BTS/KD-X37MBS: Displayed only when [ANDROID]
of [SELECT] is set to [YES].
[STATUS] Shows the status of the selected device.
[IOS CONNECTED]: You are able to use the application using the iPhone/
iPod touch connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]: No iOS device is connected to use the application.
[ANDROID CONNECTED]: You are able to use the application using the Android
device connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use the
application.
• Depending on the Bluetooth version, operating system and the
firmware version of your mobile phone, Bluetooth features may not
work with this unit.
• Be sure to turn on the Bluetooth function of the device to make the
following operations.
• Signal conditions vary depending on the surroundings.
Bluetooth — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
Adjust the microphone
angle
Secure using cord
clamps (not supplied)
if necessary.
MIC (microphone input terminal)*
Microphone (supplied)
Rear panel
* For the location of the microphone input terminal/microphone input jack, refer to page 46.
Bluetooth®
JS_JVC_KD_X470BHS_K_EN_2.indd 20JS_JVC_KD_X470BHS_K_EN_2.indd 20 6/11/2019 8:26:02 AM6/11/2019 8:26:02 AM