User Manual

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Bluetooth compatibility check mode

You can check the connectivity of the supported profile between the

Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW USING

PHONE” “PIN IS 0000” scrolls on the display.

2 Search and select the name of your receiver (“KD-T915BTS”/

“KD-T910BTS”/“KD-TD91BTS”/“KD-T91MBS”/“KD-T711BT”/

“KD-T710BT”/“KD-TD71BT”/“KD-SR86BT”) on the Bluetooth device

within 3minutes.

3 Perform (A), (B) or (C) depending on what appears on the display.

(A) “PAIRING” “XXXXXX” (6-digit passkey): Ensure that the same

passkey appears on the unit and Bluetooth device, then operate the

Bluetooth device to confirm the passkey.

(B) “PAIRING” “PIN IS 0000”: Enter “0000” on the Bluetooth device.

After pairing is done successfully, “PAIRING OK”

“Device Name” appears

and Bluetooth compatibility check starts.

If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device to

allow phonebook access to continue.

“TESTING” flashes on the display.

Bluetooth®

The connectivity result flashes on the display.

“PAIRING OK” and/or “HANDS-FREE OK”*1 and/or “AUD.STREAM OK”*2 and/

or “PBAP OK”*3: Compatible

*1 Compatible with Hands-Free Profile (HFP)

*2 Compatible with Advanced Audio Distribution Profile (A2DP)

*3 Compatible with Phonebook Access profile (PBAP)

After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has

been deleted, and the unit exits check mode.

• To cancel, press and hold B SRC to turn off the power, then turn on the

power again.

JS_JVC_KD_T915BTS_K_EN_3.indd 25JS_JVC_KD_T915BTS_K_EN_3.indd 25 5/21/2019 10:00:23 AM5/21/2019 10:00:23 AM