User Manual

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Pair and connect a Bluetooth device for the first time

Press B SRC to turn on the unit.

2 Search and select the name of your receiver (“KD-T915BTS”/

“KD-T910BTS”/“KD-TD91BTS”/“KD-T91MBS”/“KD-T711BT“/

“KD-T710BT”/“KD-TD71BT”/“KD-SR86BT”) on the Bluetooth device.

“BT PAIRING” flashes on the display.

• For some Bluetooth devices, you may need to enter the Personal

Identification Number (PIN) code immediately after searching.

3 Perform (A) or (B) depending on what appears on the display.

For some Bluetooth devices, pairing sequence may vary from the steps

described below.

(A) “Device Name” “XXXXXX” “VOL–YES” “BACK–NO”

“XXXXXX” is a 6-digit passkey randomly generated during each

pairing.

Ensure that the passkeys appear on the unit and Bluetooth

device are the same.

Press the volume knob to confirm the passkey.

Operate the Bluetooth device to confirm the passkey.

(B) “Device Name” “VOL–YES” “BACK–NO”

Press the volume knob to start pairing.

• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN

code “0000” into the Bluetooth device.

You can change to a desired PIN code before pairing.

(Page 24)

• If only “PAIRING” appears, operate the Bluetooth device to

confirm pairing.

“PAIRING COMPLETED” appears when pairing is completed and “O” will light

up when the Bluetooth connection is established.

• KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS, “

” indicator lights up

to show the strength of the battery of the connected device.