User Manual

ManualsBrandsJVC ManualsCar AudioJVC - In-Dash CD/DM Receiver - Built-in Bluetooth with Detachable Faceplate - Black

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Using Other Applications

JVC Remote application

You can control the JVC car receiver from iPhone/iPod touch (via Bluetooth

or via USB input terminal) or Android device (via Bluetooth) using

JVC Remote application.

• For more information, visit <http://www.jvc.net/cs/car/>.

Preparation:

Install the latest version of JVC Remote application on your device before

connecting.

Start using JVC Remote application

Start up the JVC Remote application on your device.

2 Connect your device.

• For Android device:

Pair the Android device with this unit via Bluetooth. (Page 20)

• For iPhone/iPod touch:

Connect iPhone/iPod touch to the USB input terminal. (Page 10)

(or)

Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 20)

(Make sure the USB input terminal is not connected to any device.)

3 Select the device to use from the menu.

See the following “Settings to use JVC Remote application”.

By default,

[ANDROID]

is selected. To use iPhone/iPod touch, select

[YES]

for

[IOS]

Settings to use JVC Remote application

Press and hold .

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press to exit.

To return to the previous setting item, press

Default: [XX]

[REMOTE APP]

[SELECT] Selects the device ([IOS] or [ANDROID]) to use the application.

[IOS]

[YES]: Selects iPhone/iPod touch to use the application via Bluetooth or

connected via USB input terminal. ; [NO]: Cancels.

If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/

iPod touch is connected via USB input terminal) to activate the application.

• The connectivity of the application will be interrupted or disconnected if:

– You change from iPod BT source to any playback source connected via the

USB input terminal.

– You change from iPod FRONT/iPod REAR/iPod USB source to iPod BT source.

[ANDROID]

[YES]: Selects Android device to use the application via Bluetooth. ;

[NO]: Cancels.

[ANDROID

LIST]

Selects the Android device to use from the list.

• Displayed only when [ANDROID] of [SELECT] is set to [YES].

[STATUS] Shows the status of the selected device.

[IOS CONNECTED]: You are able to use the application using the iPhone/

iPod touch connected via Bluetooth or USB input terminal.

[IOS NOT CONNECTED]: No iOS device is connected to use the application.

[ANDROID CONNECTED]: You are able to use the application using the Android

device connected via Bluetooth.

[ANDROID NOT CONNECTED]: No Android device is connected to use the

application.

JS_JVC_KD_T915BTS_K_EN_5.indd 19JS_JVC_KD_T915BTS_K_EN_5.indd 19 6/18/2019 2:34:04 PM6/18/2019 2:34:04 PM