Quick Start Guide

8
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
5 Turn the volume knob to choose a color, then press the knob.
• [COLOR01] to [COLOR49]
• [USER] : The color you have created for [DAYCOLOR] or
[NIGHTCOLOR] is shown.
• [COLORFLOW01] to [COLORFLOW03] : Color changes at
different speeds.
• [CRYSTAL] / [FLOWER] / [FOREST] / [GRADATION] / [OCEAN] /
[RELAX] / [SUNSET] : The selected color pattern is
shown. (Selectable only when [ALLZONE] is selected
in step 4.)
6 Repeat step 4 and step 5 to set color for other zones.
7 Press to exit.
Other Information
For playback operations of AUX, Spotify, Pandora®, SiriusXM® Radio,
AMAZON ALEXA sources, refer to the INSTRUCTION MANUAL on the
following website: <http://www.jvc.net/cs/car/>
• The availability of each source vary depending on the model.
Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery
8 Press to exit the setting menu.
Note:
For KD-T910BTS/KD-TD91BTS/KD-T711BT/KD-T710BT/KD-TD71BT/
KD-SR86BT, you need to set [SPK/PRE OUT] to [REAR/SUB.W] or [SUB.W/SUB.W]
before you can make the subwoofer level settings.
Illumination Color Setting
For KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS, you can set your
preferred illumination color for each zone.
1 Press and hold to enter menu settings.
2 Turn the volume knob clockwise to select [COLOR] , then press the knob.
3 Press the volume knob if [PRESET] is shown on the display.
4 Turn the volume knob to choose a zone ( [ALL ZONE] , [ZONE 1] , [ZONE 2] ),
then press the knob.
JS_JVC_QSG_KD_T915BTS_K_EN_5.indd 8JS_JVC_QSG_KD_T915BTS_K_EN_5.indd 8 6/19/2019 1:56:06 PM6/19/2019 1:56:06 PM