Instruction Manual

57
ENGLISH
Symptoms Causes Remedies
SIRIUS
• “CALL 1-888-539-
SIRIUS TO SUBSCRIBE”
scrolls on the display.
Subscription has not been
done.
Starts subscribing (see page
44).
• “No Signal” appears on
the display
Signals are too weak. Move to an area with
stronger signals.
• “No Antenna” appears on
the display.
The antenna is not connected
firmly.
Connect the antenna firmly.
• “Invalid Channel” appears
on the display for about
5 seconds, then returns to
the previous display.
No broadcast on the selected
channel.
Select another channel.
• “Skipped Channel”
appears when presetting a
channel.
The channel is set to be
skipped.
Add the channel again (see
page 48).
• You cannot select a certain
category.
All channels in the category
are skipped.
Restoring a skipped channel
automatically restore the
category.
• “No name” appears on the
display.
No text information for the
selected channel.
• No sound can be heard. “Channels Updating XX%*
Completed” appears on the
display.
The receiver is updating the
channel information and
it takes a few minutes to
complete.
• SIRIUS radio does not
work at all.
The built-in microcomputer
may function incorrectly due
to noise, etc.
Reconnect the SIRIUS radio
after a few seconds.
• “Reset 08” appears on the
display.
Connections are incorrect. Check the cords and
connections.
* Changes every 20% of update until completed (ex. 20%, 40%, 60%).
EN54-59_KD-AR8500[J]f.indd 57EN54-59_KD-AR8500[J]f.indd 57 05.4.8 2:46:51 PM05.4.8 2:46:51 PM