KD-S595 ENGLISH CD RECEIVER !" KD-S595 ‰∑¬ CD ‡§√◊ËÕ߇≈Ëπ CD KD-S595 DIRECT TRACK ACCESS LOUD SEL DISP For installation and connections, refer to the separate manual.
ENGLISH IMPORTANT FOR LASER PRODUCTS Precautions: 1.CLASS 1 LASER PRODUCT 2.CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all servicing to qualified service personnel. 4.CAUTION: This CD player uses invisible laser radiation and is equipped with safety switches to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................. 2 How to use the MODE button ...................... 2 LOCATION OF THE BUTTONS ...............4 Control panel ............................................... 4 BASIC OPERATIONS ..........................5 Turning on the power ..............
ENGLISH LOCATION OF THE BUTTONS Control panel o ; a Display window s df g h j k 5 12 34 67 8 9 FM DIRECT TRACK ACCESS CD SSM AM MO q p 1 2 3 4 5 6 7 8 9 p q w e r t y u i (Standby/On/Attenuator) button +/– buttons LOUD (Loudness) button SEL (Select) button Loading slot AM button 0 (Eject) button CD button FM button DISP (Display) button MO (Monaural) button RPT (Repeat) button RND (Random) button Number buttons MODE button SCM (Sound Control Memory) button (Control panel release) button 4 / ¢
1 ENGLISH BASIC OPERATIONS FM CD SSM 2 AM MO RPT RND MODE SCM 3 Turning on the power 1 4 Adjust the sound as you want (see pages 12 – 14). Turn on the power. To drop the volume in a moment Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 To turn off the power Select the source. Press and hold appears on the display.
ENGLISH RADIO OPERATIONS FM CD SSM AM MO Listening to the radio You can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search 1 RPT RND MODE SCM To stop searching before a station is received, press the same button you have pressed for searching. Searching a station manually: Manual search 1 Select the band (FM 1 – 3, AM). Select the band (FM 1 – 3, AM).
Tune in to a station you want while “M” is flashing. Press ¢ to search stations of higher frequencies. to search Press 4 stations of lower frequencies. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds. • If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM) until you release the button.
ENGLISH Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Ex: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store FM stations into (in this example, FM1). • Each time you press the button, the FM band changes as follows: FM FM1 FM2 FM3 Notes: • A previously preset station is erased when a new station is stored in the same preset number.
ENGLISH CD OPERATIONS FM CD SSM AM MO RND MODE SCM All tracks will be played repeatedly until you stop playback. Playing a CD 1 RPT Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. Note: When a CD is inserted upside down, the CD automatically ejects. The CD-in indicator flashes To stop play and eject the CD Press 0. CD play stops and the CD automatically ejects from the loading slot.
ENGLISH Locating a track or a particular Selecting CD playback modes portion on a CD To play back tracks at random (Random Play) 1 Press MODE to enter the functions mode To fast-forward or reverse the track Press and hold ¢, while playing a CD, to fast forward the track. 2 Press and hold 4 , while playing a CD, to reverse the track. while playing a CD. This unit enters the functions mode. Press RND (Random), while still in the functions mode, so that the RND indicator lights up on the display.
ENGLISH Prohibiting CD ejection You can prohibit the CD ejection and can lock a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. CD “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. To cancel the prohibition and “unlock” the CD, press and hold CD and 0 again for more than 2 seconds. “EJECT” appears on the display, and the CD ejects from the loading slot.
ENGLISH SOUND ADJUSTMENTS 2 Adjusting the sound Adjust the level You can adjust the sound characteristics to your preference. 1 To increase the level. Select the item you want to adjust. To decrease the level. Each time you press the button, the adjustable items change as follows: Indication To do: Range BAS (Bass) Adjust the bass. –06 (min.) | +06 (max.) TRE (Treble) Adjust the treble. –06 (min.) | +06 (max.) FAD (Fader)* Adjust the front and rear speaker balance.
Recalling the sound modes When “SCM LINK” is set to “LINK ON,” select the source. You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD.
ENGLISH Storing your own sound adjustment You can adjust the sound modes (BEAT, SOFT, POP: see page 13) to your preference and store your own adjustments in memory. • There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again. 1 5 To turn on/off the loudness function. See page 12 for details. 6 Call up the sound mode you want to adjust. Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
To Cancel Advanced SCM Setting the clock 1 Press and hold SEL (Select) for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears on the display. 2 Set the hour. 1 Select “CLOCK H” if not shown on the display. 2 Adjust the hour. 1 2 You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources.
ENGLISH Selecting the level display 3 Select the desired mode — “VOL 1”, “VOL 2” or “OFF”. You can select the level display according to your preference. When shipped from the factory, “VOL 2” is selected. VOL 1 : Shows the volume level indicator. VOL 2 : Alternates “VOL 1” setting and illumination display. OFF : Erase the volume level indicator. 1 4 Press SEL (select) to finish the setting. Press and hold SEL for more than 2 seconds.
How to attach the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. 1 Insert the left side of the control panel into the groove on the panel holder. ENGLISH Detaching the control panel How to detach the control panel Before detaching the control panel, be sure to turn off the power. 1 2 Unlock the control panel.
ENGLISH MAINTENANCE Handling CDs Moisture condensation This unit has been designed to reproduce CDs and CD-Rs. • Other discs cannot be played back. This unit is not compatible with MP3. How to handle CDs Center holder When removing a CD from its case, press down the center holder of the case and lift the CD out, holding it by the edges. • Always hold the CD by the edges. Do not touch its recording surface.
What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • CD cannot be played back. CD is inserted upside down. Insert the CD correctly. • CD sound is sometimes interrupted. You are driving on rough roads. Stop CD play while driving rough roads. CD is scratched. Change the CD. Connections are incorrect. Check the cords and connections. No CD is in the loading slot. Insert a CD into the loading slot.
ENGLISH SPECIFICATIONS AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Front: 45 watts per channel Rear: 45 watts per channel Continuous Power Output (RMS): Front: 17 watts per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 17 watts per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
KD-S595 Installation/Connection Manual !"#$ °“√µ‘¥µ—ßÈ /§Ÿ¡Ë Õ◊ °“√µ‘¥µ—ßÈ ØVO d² « ULOKFð VÒO² qO u² « V J C GET0117-003A 1002KKSFLEJEIN EN, CH, TH, AR [U] ENGLISH • This unit is designed to operate only on 12V DC, NEGATIVE ground electrical systems.
• When using the optional stay • !"# • When installing the unit without using the sleeve • !"#$%&'($ • • ‡¡◊ËÕ„™Èµ—«¬÷¥·∫∫‡≈◊Õ°‰¥È (“¡“√∂‡≈◊Õ°‡ª‘¥§È“߉«È ‰¥È) ‡¡◊ËÕµ‘¥µ—Èß™ÿ¥ª√–°Õ∫‚¥¬‰¡Ë „™Èª≈Õ°ÀÿÈ¡ wX«u « qJON « «bQ²Ý« ÊËbÐ “UN'« V dð U)bMŽ • XO³¦²K w U{« bM8) «bQ²Ý« bMŽ • In a Toyota for example, first remove the car radio and install the unit in its place. ! TOYOTA !"#$%& '()*+,-.
ENGLISH wÐdŽ ‰∑¬ ELECTRICAL CONNECTIONS ! To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. If you are not sure how to install this unit correctly, have it installed by a qualified technician. Note: This unit is designed to operate only on 12V DC, NEGATIVE ground electrical systems.
!"#$%&'()* PRECAUTIONS on power supply and ¢ÈÕ§«√√–«—ß ”À√—∫°“√µËÕ·À≈Ë߮˓¬°”≈—ß·≈–≈”‚æß: speaker connections: • !"#$%&'&()*+,-./01 • լ˓µËÕ “¬µ–°—Ë«‡§‡∫‘≈°”≈—ߢÕß≈”‚æ߇¢È“°—∫·∫µ‡µÕ√’Ë√∂¬πµÏ • DO NOT connect the speaker leads of the power ¡‘©–π—Èπ™ÿ¥ª√–°Õ∫®–‰¥È√—∫§«“¡‡ ’¬À“¬¡“° !" cord to the car battery; otherwise, the unit will • µËÕ “¬µ–°—Ë«·µË≈– ’„ÀÈ∂Ÿ°µÈÕß : ’¥” ( “¬¥‘π), ’‡À≈◊Õß (‡¢È“ • !"#$%&"' ! !"# be seriously damaged.
