Owner's Manual
Table Of Contents
ENGLISH
15
Auto Pairing
When you connect the following device to
the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
KD-R770BT
: Android device
Other models
: iPhone/ iPod touch/ Android
device
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is
turned on.
– [
AUTO CNNT
] is set to [
ON
]. (
18
)
– JVC MUSIC PLAY application is installed on
the Android device (
7
) and [
AUTO MODE
] is
selected (
8
).
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• For
KD-R975BTS
/
KD-R970BTS
/
KD-RD97BT
/
KD-R97MBS
:
The buttons will blink in the color you have selected in [
RING COLOR
]. (
16
)
For
KD-R875BTS
/
KD-R870BT
/
KD-R770BT
/
KD-RD87BT
:
The buttons will blink in the blinking pattern you have selected in [
RING ILLUMI
]. (
16
)
• The unit answers the call automatically if [
AUTO ANSWER
] is set to a selected time. (
16
)
During a call:
• For
KD-R975BTS
/
KD-R970BTS
/
KD-RD97BT
/
KD-R97MBS
:
The buttons stop blinking and illuminate in the color you have selected in [
RING COLOR
]. (
16
)
For
KD-R875BTS
/
KD-R870BT
/
KD-R770BT
/
KD-RD87BT
:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the volume knob.
Press
.
Reject a call
Press and hold
or the
volume knob.
Press and hold
.
End a call
Press and hold
or the
volume knob.
Press and hold
.
BLUETOOTH®
JS_JVC_KD_R975BTS_K_EN_10_ff.indd 15 8/10/2015 9:31:01 AM