Owner's Manual

ENGLISH
25
STEERING
WHEEL
REMOTE
KD-R670 KD-R570 /
KD-R470 /
KD-R370
KD-R775S
Car fuse block
Ignition switch
Recommended connection
Light blue/yellow
Blue/white: To amplifier
Blue: To power antenna
Make this connection if your
vehicle factory wiring harness
does not have “12V ignition
switch” wire.
Separate red wire
Signal cord
(not supplied)
Remote wire
(not supplied)
To the steering
wheel remote
control adapter
Fuse (10A)
Output terminals
JVC Amplifier
*
1
Factory wiring
harness (vehicle)
Vehicle
dashboard
Black: Ground
Yellow: Battery 12V
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Purple: Rear speaker (right)
Purple/black
Join the same color wires together.
Red: Ignition 12V
Orange/white: Illumination
Blue/white: Remote (200mA max.)
Part list for
installation
(A) Faceplate
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
Wiring connection
Green: Rear speaker (left) *
2
Green/black *
2
*
2
KD-R670 / KD-R570
/
KD-R470 / KD-
R370
: You can also
connect a subwoofer
speaker directly using
this lead without an
external subwoofer
amplifier. For setting,
 16 .
KD-R775S :
Expansion port
(12 V
500mA)
To the optional
SiriusXM Vehicle
Tuner (commercially
available)
( 11)
Brown: Tel muting
*
1
Firmly connect the ground
wire of the amplifier to
the car’s chassis to avoid
damaging the unit.
IMPORTANT
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult your
car audio dealer.
Custom wiring harness
(separately purchased)
Antenna terminal
JS_JVC_KD_R775S_K_EN_9.indd 25 10/8/2015 2:01:52 PM