Operation Manual

Installation/Connection Manual
208
Demo Mode (
DEMO)
The Demo Mode is intended for demonstration purposes. A fixed loca-
tion is given to the unit (Hamburg Werderstaße).
• In the Service Mode, select
DEMO with the right rotary control
and press to confirm.
Select between
ON and OFF by briefly pressing the right rotary
control . By holding down the right rotary control , the selec-
tion is confirmed.
• You can now enter a destination as described in the operation
guide.
To exit the Demo Mode, select
OFF with the right rotary control and
press to confirm.
EN185-209_Install.fm Page 208 Wednesday, June 2, 2004 5:32 PM