Operation Manual

Installation/Connection Manual
207
• Engage the reverse gear for the reverse signal function test.
• Drive round a bend to test the function of the internal sensors.
In order to quit the sensor test, press the button. The unit switches
back to the Service Mode.
Test language (SPEECH TEST)
A test program is used to test the voice.
• In the Service Mode, select
SPEECH TEST with the right rotary
control and press to confirm.
The announcement “Please insert Navigation CD” is given.
By pressing the right rotary control , the announcement can be
repeated.
Press the button after completing the test. The unit switches
back to the Service Mode.
)
The number value after REV. must jump from 0 to 1 (1 to 0).
)
The values after X: and Y: must change.
EN185-209_Install.fm Page 207 Wednesday, June 2, 2004 5:32 PM