Operation Manual

Installation/Connection Manual
187
Installation instructions
)
Damage due to reverse polarity or short-circuit.
Incorrect cable connections and short-circuits can seriously damage the unit.
Disconnect the vehicle battery before installing the unit.
)
In order to avoid short-circuits and malfunctions, install the cables so that they cannot be pinched, kinked, chafed
or detached.
)
Before installation, park the vehicle in a safe and level place and remove the ignition key.
)
In order to avoid malfunctions, it is absolutely essential to observe the relevant cable cross-section when using
branch connections/cable connectors.
)
In order to avoid short-circuits and any associated risk of fire, cables which have to be cut must be properly insu-
lated.
EN185-209_Install.fm Page 187 Wednesday, June 2, 2004 5:32 PM