Operation Manual

176
PSM (Preferred Setting Mode) menu
AUX input (Aux)
This can be used to switch on the CD
changer AF connections if no CD chang-
er is connected. An external unit (such as
MD player) can then be connected.
X To set, call up PSM menu.
X By pressing multifunction button
, call up the 2nd level of the PSM
menu.
X With multifunction button , se-
lect either
AUX Mode on (On) or
Aux Mode off (Off).
The setting is stored automatically.
In CD mode, multifunction button
must be pressed to select AUX mode.
Display compass (Cmp)
When the navigation is not active, it is
possible to have a compass and the cur-
rent time shown on the right side of the
display.
X To set, call up PSM menu.
X By pressing multifunction button
, call up the 2nd level of the PSM
menu.
X With multifunction button , se-
lect either
Show compass (compass
is displayed) or
Hide compass
(compass is not displayed).
If the compass display is switched off
and navigation is not currently active,
radio station abbreviations can be as-
signed to 9 multifunction buttons in FM-
DAS mode.
The setting is stored automatically.
Signal tone volume (BeV)
The volume of signal tones (e.g. storage
confirmation) can be set using this func-
tion.
X To set, call up PSM menu.
X By pressing multifunction button
, call up the 2nd level of the PSM
menu.
X Press the multifunction button.
With the right rotary control , select
between
0 (Low) or +5 (Loud).
The setting is stored automatically.
EN_KD-NX10.book Page 176 Tuesday, June 1, 2004 10:50 AM