Operation Manual

173
PSM (Preferred Setting Mode) menu
User settings
Opening / quitting PSM menu
After calling up the PSM menu, the fol-
lowing basic settings can be made on
two levels according to your personal
preferences.
First level:
•
Gal - Speed-dependent volume
control (GAL)
•
Tel - Telephone response
•
Lcd - Display setting
•
Col - Display colour setting
•
Lum - Display brightness
•
Led - Adjusting LED
•
M/S - Adjusting reception
optimisation
•
Nav - Adjusting navigation
announcements
Second level:
•
Aux - Adjusting the AUX input
•
Cmp - Adjustment of the Compass
Display
•
BeV - Adjusting signal tone volume
X The PSM menu is requested by press-
ing the button for longer than 2
seconds.
X To access the second level of the PSM
menu, press multifunction button
.
X Press the button again to quit
the PSM menu.
Setting the GAL (Gal)
The GAL is a car radio control circuit,
which automatically adjusts the car ra-
dio volume according to vehicle speed.
This results in compensation of the driv-
ing noise produced at higher speeds.
X Calling up the PSM menu.
X Press the multifunction button.
X With the right rotary control , select
either
0 or +15.
The GAL setting can be used to specify
the starting point for the volume increase
according to vehicle speed.
The setting is stored automatically.
The settings are:
•
0 - No volume increase
•
+1 - Volume increase is initiated at
low speed
•
+15 - Volume increase is initiated at
higher speed
EN_KD-NX10.book Page 173 Tuesday, June 1, 2004 10:50 AM