Operation Manual

158
Radio operation
TP Announcement volume
X Selecting TP Menu.
X Press the multifunction button.
X With the right rotary control , four
different settings (
0 - +3) can be se-
lected.
This means that the volume can be
raised by a fixed amount depending on
the setting.
•Setting
0 - no increase
•Setting
+1 - slight increase
•Setting
+2 - moderate increase
•Setting
+3 - strong increase
Switching TMC on/off
X Activating TP Menu.
Switching on:
X Press multifunction button re-
peatedly until
TMC on appears.
Switching off:
X Press multifunction button re-
peatedly until
TMC off appears.
Selecting TMC station
To improve the reception of TMC traffic
announcements, you can select a station
that transmits the TMC data.
X Switching on TP menu.
X Press the multifunction button.
X Use the right-hand rotary control
to select the desired TMC station.
The selected station is adopted and set.
Note:
Further information on TMC can be
found under “Dynamic route guidance
with TMC” on page 133.
Note:
With the TMC switched off, no dynam-
ic navigation functions (Dynamic
Route, Traffic Information) can be se-
lected or called up.
Note:
You can then also select another station
again without TMC. However, this
eliminates the advantage of the set
TMC-station.
EN_KD-NX10.book Page 158 Tuesday, June 1, 2004 12:38 PM